Table of Contents
Advertisement
DISASSEMBLY INSTRUCTIONS
CAUTION IS ADVISED WHEN DISASSAMBLING AND LIFTING ITEMS.
YOU MUST ENSURE THAT THE PERSON UNDERTAKING THIS
PROCEDURE IS PHYSICALLY CAPABLE OF LIFTING THE WEIGHT
1) Ensure that the area in which the Powerchair is to be dismantled is
spacious enough to accommodate all the components.
2) Remove the plug at the end of the controller located at the back of the
powerchair by pulling on the ring provided. CAUTION: Lay plug down
carefully to avoid damaging chassis cover!
3) The arms may be removed to make the seat lighter to lift. At the rear of
the seat you will find two hand knobs. Release both by turning clockwise
and slide out arms from each side.
4) Fold seatback forward.
5) Pull up on the 2 red tabs located under the front of the seat and the seat
will lift up towards the rear of chair.
6) Lift seat off.
7) Open battery cover door.
8) Unclip red and black battery plugs. Undo the Velcro carrying straps, and lift
batteries by their handles.
TO RE-ASSEMBLE YOUR POWERCHAIR SIMPLY REVERSE
Disassembly
WARNING:
INVOLVED.
THE ABOVE DESCRIBED PROCEDURES.
12
Advertisement
Table of Contents
