Moultrie M-99Oi Instructions Manual page 10

F
SETTING TIMELAPSE OPTIONS (cont.)
Setting Program Wake up
Press the OK button. Use the Up/Down buttons to choose
between 24 different settings: any hour from MlDNlGHT to
11 PM. This will determine what time the camera will wake up
during the program and begin its time lapse program. Setting
to ALWAYS ON will make the camera operate in timelapse 24
hours/day. Press Right button to go to the next option.
Setting Program Sleep
When wakeup time is set, the camera will automatically move
to the Sleep option. Set the sleep time after the wakeup time
you already set. This will set the wake up and sleep during the
time lapse photography. Press the OK button. Press Left button
to go to the next option.
NOTE: Repeat the above steps for Program #2 to be set.
Press Left button to go to the Main Screen.
WARNING: If Program #1 is set to Always On,
settings for Program #2 will be disabled.
Reset Options
Press the OK button. Use the Up/Down buttons to choose
between to reset your Timelapse options.
G
SETTING MOTION + TIMELAPSE OPTIONS
Setting Motion + Timelapse Features
When in this operating mode, the camera will operate on the
Timelapse settings until it detects motion. The camera will
then wake and capture the photo or video and then return to
the set Timelapse program.
NOTE: The settings entered for both Timelapse and Motion
Detect modes will be used when in this mode. Settings can
be made in their respective menus.
Page 10
M-990i (Gen2) Digital Game Camera
T.L. PROGRAM #1 START TIME
X 6am
5am
4am
3am
2am
1am
T.L. PROGRAM #1 START TIME
X MIDNIGHT
11pm
10pm
9pm
8pm
7pm
TIMELAPSE (TL) MODE
RESET OPTIONS
X Do Not Reset
Factory Defaults
MOTION DETECT + TL MODE
START
4
Note:
Adjust settings in MOTION DETECT
and TIME LAPSE modes.
(press OK to take test photo)
General Settings
From the Main Screen, use the Up/Down buttons to navigate
to General Settings. Press the Right button to select.
H
SETTING INFOSTRIP OPTIONS
Infostrip Settings
From the Infostrip Settings Main Screen, use the Up/Down
buttons to navigate to the setting you want to adjust. Press
the Right button to select.
Setting Date and Time
Press the OK button. Use the Left/Right buttons to move
from one value to the next and the Up/Down buttons to
adjust each value. Press the OK button to lock in selections.
When all your selections have been made, and the date and
time has been set, press the Right button to move to the
next option.
Setting Camera Name
and Left/Right buttons
Press the OK button. Use the Up/Down
to select an identity for your camera. For example, you can
use a name or a location; the identity you wish to use is up
to you. Press the OK button to confirm the selection. Press
the Right button to move to the next option.
M-990i (Gen2) Digital Game Camera
GENERAL SETTINGS
INFOSTRIP SETTINGS
4
PHOTO/VIDEO SETTINGS 4
MEMORY SETTINGS 4
SYSTEM SETTINGS 4
INFOSTRIP SETTINGS
DATE & TIME 4
CAMERA NAME 4
TEMPERATURE UNITS 4
INFOSTRIP ACTIVE 4
INFOSTRIP SETTINGS
DATE & TIME
12 / 14 / 2014
10 : 23 pm
INFOSTRIP SETTINGS
CAMERA NAME
M O U L T R I E C A M
Page 11