Advertisement
4. Master/slave Mode
Press the "MODE", enter slave mode "
If in this mode, the slave fixtures will totally follow the master fixture's working mode.
5. Sound-Active Mode
1) Press the "MODE" button and the fixture will enter into sound active mode "Soud".
2) Press the "SETUP" button to set the sound active sensitivity.
3) Press the "UP" or DOWN" button, you can set the sound active sensitivity "
6. Static Color Mode
1) Press the "MODE" button and the fixture will enter into static color mode "
2) Press the "SETUP" button to select the static colors: r.255, g.255, b.255, u.255, A.255.
3) Press the "UP" or "DOWN" button, the user can adjust the monochrome brightness value. It will show the color
dimming effect when the value is reach 255.
NOTE:
1. If no operation within 20 seconds, the display board will be turned off and lock the buttons at the same time to
prevent irrelevant personnel error operation. If press any button at this time, the LED display will show "Lock",
which means the buttons have been locked. Press the "MODE"+ "DOWN" buttons at the same time for two
seconds to unlock, the LED display will recover to the state before turning off, and then all the buttons will regain
their own functions.
2. This fixture has the self-protection function against the excess temperature. The system will adjust the service
power automatically according to the heat dissipation of the fixture when the user makes all the LEDs work for a
long time. Please make sure the working condition is ventilated.
Pr.02
23-45
Pr.03
46-68
Pr.04
69-91
Pr.05
92-114
Pr.06
115-137
Pr.07
138-160
Pr.08
161-183
Pr.09
184-206
Pr.10
207-229
Pr.11
230-252
Sound
253-255
active Mode
".
GA
208-220
BA
221-233
WA
234-246
247-255
RGBWA
0-255 SPEED
Sensitivity
".
~
".
Advertisement
