Summary of Contents for Veloce LP-1
- Page 1 OWNERS MANUAL LP-1 Phono Module 2011 OWNERS MANUAL P a g e Platino LP-1 Phono Module...
-
Page 2: Table Of Contents
Table of Contents GENERAL INFORMATION SAFETY INSTRUCTIONS TRANSPORTING AND UNPACKING AUDIO CONNECTIONS- The Back Panel CONTROLS/DISPLAY – The Front Panel TUBES BATTERIES CARE AND MAINTENANCE SPECIFICATIONS WARRANTY CONTACT US P a g e... -
Page 3: General Information
Thank you for selecting the Veloce LP-1 Phono Module. Our relentless pursuit of the best in all elements of the design and manufacture of the LP-1 has only one goal – to provide you, the serious audiophile and music lover, with the best and most natural musical reproduction possible. -
Page 4: Safety Instructions
8. Never replace any fuse with a type or value other than those specified. 9. Never attempt to repair this product. If a problem occurs contact your deal or Veloce Audio directly. 10. Never expose this product to extremely high or low temperatures. -
Page 5: Transporting And Unpacking
Secondly, be sure that the LP-1 has adequate ventilation. Once set up, you will not need access to the LP-1 on a regular basis. An umbilical cord is included for attachment of the LP-1 to the LS-1. We will address the connection of this umbilical cable in the next section. -
Page 6: Audio Connections- The Back Panel
ON the LS-1 main unit via remote or the UP button on the front panel. The blue LED on the front panel of the LP-1 will light if it is switched ON. This is normal and shows that the unit is working properly. -
Page 7: Controls/Display - The Front Panel
CONTROL/DISPLAY –The Front Panel The front panel of the LP-1 is simple and all business. The black anodized faceplate has a blue LED inset which shows that the unit is powered up. Besides that there are no controls on the front panel. -
Page 8: Tubes
A little extra effort will be required to remove the stock tubes. Additional adhesive pads can be supplied by Veloce Audio upon request. When rolling different tubes into the LP-1, please note that the greatest effects can be noticed by switching the 1 GAIN PAIR first. -
Page 9: Batteries
Use of the LP-1 reduces the play time (battery life) of the LS-1 by 25% – still excellent. The LP-1 can be turned on and off with the LS-1 or separately via the rear switch– if you want to conserve battery life. -
Page 10: Specifications
SPECIFICATIONS LP-1 MC pair single-ended RCA connections Phono Inputs Phono Output 1 pair RCA connections Vacuum Tube Compliment (4) 12AX7 dual triode tubes Gain 64 dB Input Impedance 47 kOhms (adjustable via cartridge loading plugs) 470 Ohm (native xfmr impedance) -
Page 11: Warranty
4. Ship freight prepaid to Veloce Audio LLC at the address below via insured freight. We will repair the problem and return it to your Veloce Audio dealer via surface freight without any charge for parts, labor, or return shipping. Any implied warranties relating to Veloce Audio products shall be limited to the duration of this warranty. -
Page 12: Contact Us
Your dealer will be your first line of contact for any questions you have regarding your Veloce Audio product. The will, of course, give you the highest level of support and will work to make your ownership experience first rate.