Summary of Contents for Flash butrym FLZ-2000
- Page 1 FOG MACHINE FLZ FOG MACHINE FLZ-2000 2000 User Manual User Manual www.flash-butrym.pl Page 1...
- Page 2 CAUTION! Keep this device away from rain and moisture! Unplug mains lead before opening the housing! Make sure of the voltage on your end suitable for the unit! For your own safety, please read this user manual carefully before you initially start-up. Every person involved with the installation, operation and maintenance of this device has to: - be qualified - follow the instructions of this manual...
- Page 3 4. STARTING OPERATION 1. DMX protocol Install the device on a plane surface. The fluid tank of the device needs to be filled with standard fogger fluid before starting up operation and always disconnected from the mains as fluid could be spilled. We recommend high-quality Glow fogger fluids. You must not use substances that are classified as “dangerous working material”...
- Page 4 Cleaning the heating element. The heating element should regularly be cleaned every 30 operational hours in order to avoid clogging. Procedure: Fill cleaner into empty tank. Run the machine several times in a well-ventilated room only. The number of repetitions depends on the pollution level of the vaporizing elements. After use clean all remaining cleaner and rinse the tank thoroughly.
Need help?
Do you have a question about the FLZ-2000 and is the answer not in the manual?
Questions and answers