Table of Contents
Advertisement
Quick Links
V3062 Series
Embedded Network Digital Video Recorder
Installation/Operation Instructions
This manual is applicable for the installation and operation of Infinova V3062 series Embedded
Network Digital Video Recorders.
Infinova V3062 Series DVR integrates advanced video compression and storage technologies, with 4-ch
analog video inputs, 4-ch full H.264 video encoding and G711 audio encoding. It supports synchronal
audio inputs, USB2.0 high-speed backup, and mouse operations.
The functional DVR can be widely used in security surveillance for small shops, band ATMs, public
security, telecommunication, traffic, and education etc.
Advertisement
Table of Contents
Related Manuals for Infinova V3062 Series
Summary of Contents for Infinova V3062 Series
- Page 1 V3062 Series Embedded Network Digital Video Recorder Installation/Operation Instructions This manual is applicable for the installation and operation of Infinova V3062 series Embedded Network Digital Video Recorders. Infinova V3062 Series DVR integrates advanced video compression and storage technologies, with 4-ch analog video inputs, 4-ch full H.264 video encoding and G711 audio encoding.
- Page 3 This device must accept any interference received, including interference that may cause undesired operation. V3062 series Network Digital Video Recorders have been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment.
- Page 4 Indicates operations that should be conducted in strict compliance with instructions and guidelines contained in this manual. Use at altitude below 2000m. Use in nontropical areas. Warning: To avoid risk of fire and electric shock, keep indoor products away from rain and moisture! Related Documentations <V3062 Series Embedded DVR Quick Operation Guide>...
- Page 5 Change the damaged harddisk to insure the integrality of the record data (The information of the harddisk error is in the log) It's better to use the recommended HDDs only. Please visit below link for the list of the HDDs recommended by Infinova:...
-
Page 7: Table Of Contents
Table of Contents Chapter 1 System Overview ............1 4.4.2 PTZ Control ..............16 1.1 Product Description .............. 1 4.4.3 Set and Call Preset............16 1.2 Front Panel Introduction ............2 4.4.4 Set and Call Pattern ............. 16 1.3 Remote Controller Introduction ..........4 4.5 Alarm .................. -
Page 9: Chapter 1 System Overview
USB2.0 high speed backup and y USB2.0 port for external hard disks and mouse devices mouse device operations are also supported. V3062 series DVR is y 4 alarm inputs and 2 relay outputs ideal for the monitoring of small shops, ATM banks, and can be... -
Page 10: Front Panel Introduction
1.2 Front Panel Introduction Figure 1-1 Front panel Name Type Description Channel Channel 1~4 status indication, "Green" indicates recording is ongoing, "red" indicates CH1~CH4 status net transfer is ongoing, "orange" indicates both recording and net transfer are ongoing indicator Status READY Green: DVR is ready to work indicator... - Page 11 Name Type Description MENU etc.) can stop the autopan (1) Switch from the preview interface to the record management interface Control key (2) In “PTZ control”, call presets. Input 3 digits number combination keys after pressing this key (1) Open iris in PTZ control status (2) Delete the characters before cursor in editing status IRIS+ Control key...
-
Page 12: Remote Controller Introduction
Name Type Description (2) Quit from PTZ control mode (3) Quit from record playback mode Power Switch Control key Device On/Off (pressing at least 3 seconds when turn off the devices) Infrared Make the controller pointed at the infrared receiver (Note: Do not cover the receiver part Receiver when use remote controller) 1.3 Remote Controller Introduction... - Page 13 Voice Intercom/ VOIP Auxiliary Function key Reserved /MON Output Direction keys The function is the same with the direction keys and ENT key on front Control key Confirmation panel IRIS Iris Control key Open/Close iris in PTZ control FOCUS Focus Control key Increase/Decrease focus in PTZ control Function key...
-
Page 14: Chapter 2 Installation And Connection
Chapter 2 Installation and Connection Reference: Formula to calculate total capacity needed for DVR Note: Make sure the power supply cable is disconnected before Calculate total capacity needed by each DVR according to video connecting DVR with other device. recording (video recording type and video file storage time). Calculate formula: 2.1 Counter-check Device and Accessories Step: Calculate the capacity... -
Page 15: Rear Panel Introduction
2.3 Rear Panel Introduction Figure 2-1 Rear Panel Item Description 1 10/100/1000Mbps self-adaptive Ethernet port for connection with network devices, ETHERNET PORT RJ45 connector. 2 standard USB 2.0 ports for connection with USB devices like mouse, U disk, mobile USB PORT disk etc. -
Page 16: Alarm Input/Output Connection Method Introduction
2.4 Alarm Input/output Connection Method DVR Alarm Output Port Introduction AC or DC Load 1. Alarm input interface introduction Relay J1400 DC/AC Figure 2-2 Alarm input interface G (GND): 1 "Alarm Input" GND ports, internally connected and Figure 2-5 Alarm output relay connection shared the GND with every alarm input device. -
Page 17: Rs-485 Pan/Tilt Decoder
This manual mainly focuses on the introduction of the operation via front panel. 3.1 Menu Operation V3062 series DVR has three levels of menu. The first level of menu is shown in Figure 3-1. Figure 2-7 Parallelism of direct cable (2) Follow below method to make the twisted network cable when DVR is directly connected with a client terminal like PC. -
Page 18: Cursor Switching
3.1.2 Option Box A "9" in the check box indicates the option is selected. Move the Channel Preview Alarm cursor to the desired option via keys, then press ENT to select it, and it cancel the selection if the option is selected when press ENT key. -
Page 19: Buttons
message. Besides small letters, users can input capital letters, symbols and Users could perform the following operations in the edit status: number, the operation as follows: (1) Delete the characters before the cursor by pressing IRIS+ 1. Input capital letters and number key;... -
Page 20: Menu Structure
Monitor, Open/Close video preview, Monitor: icon , to display the current main output monitor. Preview Switching Time, Open/Close Preview If the main output is VGA, then VGA, BNC1, BNC2 are displayed Alarm Preview, Alarm Preview Switching Time, Preview Mode by monitor1, monitor2, monitor3 correspondently. If the main Alarm Channel Status output is BNC, then BNC1, VGA, BNC2 are displayed by monitor1, Alarm Input... -
Page 21: Chapter 4 Main Functions Introduction
Channel, PTZ Address, Chapter 4 Main Functions Introduction Baud Rate, Protocol, Data Bits, Parity, Flow Control, Stop Bits 4.1 Turn on DVR Up/Down/Right Note: The DVR supports 12VDC power supply. Before powering /Left Control, Iris, Focus and on, please confirm the AC voltage matches with the requirements of Zoom in/Out;... -
Page 22: User Authority
The default administrator user name is "admin" with the password authorized user name and password, or he will fail to operate the as "12345678", and the default langue is English. DVR or the control button is unavailable. Note: Please refer to section 5.4 for user authority settings. The operating steps as follows: Step: Press ENT key to open the user name drop-down list ,... -
Page 23: Preview Setting
VGA. mouse and drag it to the left and upward direction, the image will be zoomed out (The function is only available for Infinova 2 Switch the main output via front panel: press MENU to enter the generation or above domes under the Pelco-D protocol) main menu, and move the cursor to “System”. -
Page 24: Ptz Control
"Set" and press ENT key to confirm the setting. For example, the address of the dome camera is 3, baud rate is 2400 and protocol is Infinova protocol, the setting of DVR must be the same. 2. Call Preset Press "Save"... - Page 25 Figure 4-6 Figure 4-7 Below section has detailed introduction on the setting and method In the interface, move the cursor (the white bar) to the desired for the three different types of alarm. schedule time, and press ENT key, then the area selected will 1.
-
Page 26: Alarm Input
multiple-screen display and tour alarm. Press key or any number key or ESC key to cancel the alarm display. Trigger alarm output: Select the corresponding output, press ENT key, the status becomes "9". The selected output port generates alarm trigger message once having alarm. Note: The trigger alarm output needs to connect with switching value. -
Page 27: Exception Alarm
4.6 Alarm Management 1. Alarm status It will enter the "Alarm status" menu directly when you enter the "Alarm management", as shown in Figure 4-11. Figure 4-10 1. Select alarm input Move the cursor to the alarm input, set a corresponding alarm input number, and set the alarm type. -
Page 28: Scheduled Recording
Enter the "Manual recording" interface via the main menu "Record" 4.7.2 Scheduled Recording REC key on the front panel, as shown in Figure 4-12. Enter the "Recording management" interface via the main menu "Record" or REC key on the front panel, and press WIDE key to switch to "Recording Settings"... -
Page 29: Alarm Recording
recording" in section 4.7.2. 4. Set recording video parameters Based on the demand, user should set the stream type, IP rate, 5. Confirm and save frame rate, resolution, video quality, bit rate type and max bit rate Refer to "5 Confirm and save" of "Scheduled recording" in section properly. -
Page 30: Power Off
3. Single channel playback Set the record file search criteria, like: channel, type, time range. Select and click "Search" after the setting. And press button on the panel to confirm the searching. Press the direction buttons to select the desired file, and press to confirm the operation. -
Page 31: Chapter 5 Other Settings
Chapter 5 Other Settings 5.1 Preview Settings In the preview interface, press MENU key to enter the interface as shown in Figure 5-1. Select "Preview" and press ENT key to enter preview settings interface, as shown in Figure 5-2. Press number key 2 also can enter the setting interface as shown in Figure 5-1. -
Page 32: Network Settings
(3) Video preview switch time General settings It has 8 options, never, 5s, 10s, 20s, 30s, 1m, 2m and 5m. The The general settings include 9 settings, as follows: operation is the same as the monitor. (4) Alarm preview NIC type It has two options, On and Off, the operation is the same as the IP type monitor. -
Page 33: Serial Port Settings
Type: DynDns and PeanutHull optional Server IP: set the IP of the visit server DVR Domain: input the domain of the DVR User: input user name Password: input password Confirm: confirm the password Advanced settings The advanced settings include 5 options, as follows: Default port HTTP port Alarm center... -
Page 34: System Settings
(4) Edit user Select the user to be edited, and move the cursor to icon, and press ENT key to enter edit user interface, as shown in Figure 5-10. Figure 5-10 Edit user has 4 parts, user name, old password, new password and Figure 5-8 confirm. -
Page 35: Time Settings
DST system will be changed to 15:00 in DST system. The device name supports 1 to 20 characters string. The default 2. Time zone: Set the time zone as actual demand. name is "Infinova DVR". 3. Local time: Set the local date and time. 3. Language 4. -
Page 36: Hard Disk Management
5.5.5 Data Backup There're two ways to search log: type and time. Set the search criteria, for example, major type, minor type, and To backup the important data or to prevent data form losing is very time. Select the "Search" button after finishing setting, and press useful for DVRs. -
Page 37: Advanced Settings
with the updated file list in the U-disk. It's empty if there's no file. Enter the selected directory by double-click on the directory or Select the file, and press "Upgrade" button to perform the upgrade. move the cursor to the directory and press ENT key. - Page 38 Figure 5-20 2. Click "Properties" in the "Options" menu to display the dialog box in the following figure: Figure 5-23 5. Click "OK" to return the recording dialog box, shown in the following figure: Figure 5-24 Figure 5-21 6. Adjust the volume of microphone as shown in above figure, and the setting of the sound card properties for PC is completed.
- Page 40 Infinova 51 Stouts Lane, Monmouth Junction, NJ 08852, U.S.A. Tel: 1-888-685-2002 (USA only) 1-732-355-9100 Fax: 1-732-355-9101 sales@infinova.com V1.1 1307...
Need help?
Do you have a question about the V3062 Series and is the answer not in the manual?
Questions and answers