12 Volt DC @ approx. 300mA 2.1mm Socket Tip = Negative Kicker has short-circuit and over-voltage protection built in, but using the wrong adapter can cause damage to your instrument. Please check the polarity, spec and condition of your adapter before use.
Kicker without problems Problem: The Envelope Decay control seems to have stopped working Solution: Kicker uses a ‘non-retriggering’ Attack/Decay Envelope. It is possible, when using a Decay time that is much slower (longer) than the trigger speed (Tempo), that the Decay section of the Envelope Generator might briefly ‘latch up’.
Need help?
Do you have a question about the Kicker and is the answer not in the manual?
Questions and answers