General Care And Cleaning; To Remove And Replace The Warmer Drawer - Electrolux warmer drawer Use And Care Manual

8 General Care & Cleaning
To Remove and Replace the
Warmer Drawer
Turn the warmer drawer to OFF before removing
the drawer. DO NOT touch the warmer drawer
element. The element may still be hot enough to
cause burns, even if it is dark in color.
To Remove Warmer Drawer:
1. Turn power off before removing the warmer
drawer.
2. Open the drawer to the fully opened position.
3. Locate glide lever on each side of drawer, pull up
on the right glide lever and push down on the left
glide lever (See Figure 1).
4. Pull the drawer away from the range.
To Replace Warmer Drawer:
1. Pull the plastic slider to the front of the
glide slots on each side of the drawer cavity
(See Figure 2).
2. Align the glide on each side of the drawer with the
drawer cavity glide slot.
3. Push the drawer into the drawer cavity until glide
levers "click" (approximately 2"). If you do not
hear the glide levers "click" or the drawer does
not feel seated remove the drawer and repeat
steps 1 thru 3.
Electrical Shock Hazard can occur
and result in serious injury or death.
Disconnect appliance from electric
power before cleaning and servicing
the warmer drawer.
Lever
Pull down lever
Left glide
Lever
Pull up lever
Figure 1
with fi nger
Figure 2
with fi nger
Right glide