F E At U R E S - O P E R At I O N S; Technical Specifications; Operating Instructions - Holmes HFH131 Owner's Manual

Hide thumbs Also See for HFH131:
Table of Contents

Advertisement

Available languages

Available languages

F E AT U R E S - O P E R AT I O N S

TECHNICAL SPECIFICATIONS

• Amps: 10
• Wattage: 1200W (+5% -10%)
• Working Voltage: 120V AC/60 Hz

OPERATING INSTRUCTIONS

1. Carefully remove your heater from the box. (Please
save the carton for off-season storage).
2. Place heater on firm level surface.
3. Avoid overloading your circuit by not using other high
wattage appliances in the same outlet. At 1200
Watts, this unit draws 10 Amps.
4. Plug the heater into a 120V AC electrical outlet. Once
plugged in, the Power Light will illuminate.
Thermostat Control
1. Turn the Thermostat Control clockwise to the highest
position to start heater. Allow heater to operate and
warm up the room.
2. When the desired temperature/comfort level is
reached, lower the temperature setting by turning the
Thermostat Control counter-clockwise until the heater
stops operating.
3. The control will now automatically maintain the
preset temperature level by turning the heater ON
and OFF.
NOTE: It is normal for the heater to cycle ON and
OFF as it maintains the preset temperature. To
prevent the unit from cycling, raise the thermostat to
the highest setting.
4. To shut the heater off, turn the Thermostat Control all
the way counter-clockwise towards the Off (O)
position.
Figure 1
Thermostat
Control
Power Light

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents