Capture Modes; Setting Motion Detect Options; Memory Options; System Options - Moultrie M-880 Series Instructions Manual

C

CAPTURE MODES

Setting Capture Mode
Use the Up/Down buttons to choose between operating modes. This camera has 3 modes.
1. Motion Detect - Capture photo or video when
motion or heat is detected.
2. Time Lapse - Capture photo at periodic intervals
based on the Time Lapse program setting.
3. Motion + Time Lapse - Uses a combination of
Time Lapse and Motion Detect modes at different
times of the day. Press the Right button to move to
start motion capture.
NOTE: Options for Motion and Time Lapse
can be set in their respective option menus.
D

SETTING MOTION DETECT OPTIONS

M O T I O N D E T E C T
< O P T I O N S S T A R T >
Setup Selection Setting
From the Default Screen, pressing the Menu button will enter the current capture mode's Main
Screen. Press the Down button 3 times to enter GENERAL SETTINGS. Press the Left button to move to
the next setting. Using this method you can customize your camera's feature settings.
From this Main Screen, press OK to get to the Test Capture screen.
D E T E C T I O N D E L A Y
1 0 S E C O N D S
Event Delay Setting
Detection Delay determines the number of minutes between pictures when an animal is detected and
remains in range. Press the OK button. Use the Up/Down buttons to choose between (5 sec, 10 sec,
30 sec, 1 min, 5min, 10min, or 30 min). Press OK to lock in your selection, then press Left button to go
to the next option.
Page 6
M-880 (Gen2) Series Digital Game Camera
M O T I O N D E T E C T
< O P T I O N S S T A R T >
T I M E L A P S E
< O P T I O N S S T A R T >
M O T I O N + T . L .
< O P T I O N S S T A R T >
I

MEMORY OPTIONS

M A N A G E D M E M O R Y
D O N O T O V E R W R I T E
Managed Memory
Selecting the OVERWRITE OLDEST option will cause the oldest files to be overwritten with new
captures when the SD card reaches its capacity. With the DO NOT OVERWRITE option selected, the
camera will cease image capture once the SD card reaches capacity. Press the OK button to select.
When your selection has been made, press Right button to go to the next option.
E R A S E A L L I M A G E S
N O
Erase Images
Press the OK button. Use the Up/Down buttons to choose between Yes - erase all images, or
No - does not change stored images. Press the OK button to select. When your selections has been
made, press the Right button to move to the next option.
NOTE: This will also format your SD card for use in your camera.
J

SYSTEM OPTIONS

A C C O N N E C T E D ?
N O
AC Connected
Press the OK button. When the camera is connected to an AC power supply and this option is
selected, the camera will remain on instead of going to a sleep state between detection and capture
sequences. This will greatly improve camera speed and performance and can be used in conjunction
with most external supplies, but is only recommended when connected to an AC power supply.
In the event this option is selected but no external supply is detected, it will default to the NO state.
Press the OK button to confirm the selection. Press the Right button to move to the next option.
P R O G R A M S E C U R I T Y
C O D E 0 0 0 0 0
Security Code
and Left/Right buttons to select a 5 digit security code
Press the OK button. Use the Up/Down
for your camera. Press the OK button to confirm the selection. Press the Right button to move to the
next option.
NOTE: Please remember your security code. If the code is lost, you can contact Moultrie customer
support to reset the password (charges may apply). Also, use caution when navigating through
the Security Code option as not to set a code by mistake. For no Security Code, the setting should
remain as "00000".
M-880 (Gen2) Series Digital Game Camera
Page 11