Elo TouchSystems Webcam Quick Install Manual page 2

Installing the Webcam
Please go to www.elotouch.com/support
to verify you have the latest drivers before installing this device.
1
Turn off the touchcomputer.
2
Remove the two accessory
covers on the top of the monitor.
3
To remove each cover, locate
the two small notches on the
cover.
4
Press a small screwdriver into the
cover between the two notches.
As the cover bends up, grasp the
end and peel it away.
5
Plug the cable into
the connector on the
touchcomputer.
6
Insert the hooks on the device
into the corresponding slots on
the touch computer.
Secure the device to the
7
touchcomputer using the
included screws. Cover the two
screws with the circular covers
included in the kit.
8
Attach the webcam and power
on the touchcomputer. Install
the drivers for the webcam.