Advertisement
Quick Links
Advertisement
Summary of Contents for Hexin HXSP-1008
- Page 1 HXSP-1008 8 ports RS-232 or RS-485/422 serial device server user manual...
- Page 2 Summary ports serial device servers which contact with network fast. provides line RS-232/485/422 (RS-232: DB9M: RS-484/422 / 4 bits terminal block) and 1line 10Base-T, it can manage the disperse serial device or host computer by network, easily and convenience. Setting or software upgrade by serial program group in applying. Support TCP, UDP, ARP, ICM and DHCP protocol, support Windows Native COM and auto-contact function once the network intermit.
- Page 3 60 , 5 95% RH Storage temperature: -25 85 , 5 95% RH Appearance Color: Black L×W×H: 160mm×91.2mm×30.4mm Material: Iron (shell) Weight: 230g Panel 2. HXSP-1008 HXSP-1008A is 1 port 10/100Base-T(X) to 8 ports RS-232, HXSP-1008B is 1 port 10/100Base- T(X)
-
Page 4: 10/100Base-T Ethernet Port
to 8 ports RS-485/422, the appearance is the same. The PIN define of the Ethernet port and serial port is the same as HXSP-1004 DC-IN: 5VDC power supply input 10/100M Ethernet: 10/100Base-T(X) Ethernet input and output ACT LED indicator: Bright all along when connect power supply LINK LED indicator: Bright all along when connected RX/TX LED indicator: Bright all along when connect to the network, Flash when data transfer... - Page 5 RS-232/485/422 interface RS-232 TXD RXD RTS CTS DTR DCD RS-485 RS-422 FULL GND Software installation and setting 1 Set the IP address of the device The IP address of the device and the PC must in the same subnet network (the default IP address of the device is 192.168.1.233).
- Page 6 ↑↓←→ 2. Click “OK”, setting the IP of device by telnet. Choose the menu by of the keyboard and quit by “ESC” key. 3 Choose the “Server” menu and push “Enter” key, Change the IP of the device. 4 Change the IP (the changed IP must be in the same subnet of the PC). Push “Esc” key, quit the network setting.
- Page 7 6 Push “Enter” Key, save the setting. 2. Create the Virtual COM port on the PC Setup the “setup_nt_2K.exe” software, then you will find the “COM port over tcp/ip.exe” application in the control panel of windows OS. Running the “COM port over tcp/ip.exe” application and create virtual COM port communicate with the device on the PC.
- Page 8 1 Input the IP of the device 2 Input the NO. of the port of the device(Input 1~8) 3 Input 300 4 Default the parameter Click the “OK”, Click “Save”. COM5 has been created. Now, the COM5 can communicate with the terminal on the NO.1 port of the device.
- Page 9 (1) Please make sure that the power adapter is 5VDC (2) When connect to PC, use cross-over cable. (3) When connect to HUB or Switch, use straight-through cable Installation Note: Pay attention to the questions as below: (1) Please make sure that the power adapter is 5VDC (2) When connect to PC, use cross-over cable.
Need help?
Do you have a question about the HXSP-1008 and is the answer not in the manual?
Questions and answers