Cabinet Disassembly Instructions - FUNAI LED22-T800M Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts and the CBA in order to gain access to
items to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
Assembly
[3] Rear Cover [2] Rear Cabinet
[10] IR Sensor
[5] Tuner Shield
CBA
[6] Jack CBA
[7] Digital Main
CBA Unit
[11] LCD Module
Assembly
[12] Front
Cabinet
2. Disassembly Method
Step/
Fig.
Loc. Part
No.
No.
Stand
[1] D1 2(S-1)
Assembly
Rear
[2] D1
Cabinet
[3] Rear Cover D1 2(S-6), Stand Bracket
Power
D2
[4] Supply
D3
CBA
Tuner
[5] D2 (S-8)
Shield
D2
[6] Jack CBA
D3
Digital Main D2
[7]
CBA Unit D3
Function D2
[8]
CBA D3
[9] Speaker D2 Speaker Holder
IR Sensor D2
[10]
CBA D3
[1] Stand [8] Function
CBA
[9] Speaker
[4] Power Supply
CBA
Removal
8(S-2), 2(S-3), 2(S-4),
4(S-5), 8(L-1)
4(S-7), CN501,
CN502, CN503,
CN701
7(S-9), CN103,
CN801, CN903,
CN3701, CN3702,
CN3703, CN3704
2(S-10), 7(S-11),
2(H-1), CN3901,
Jack Holder,
Shield Box
2(S-12),
Function Knob
Sensor LED Lens
Step/
Loc. Part
No.
LCD
[11] Module
Assembly
Front
[12]
Cabinet
↓ ↓
(1) (2)
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
N = Nut, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
e.g. 2(S-2) = two Screws of (S-2),
2(L-2) = two Locking Tabs of (L-2)
(5) Refer to the following "Reference Notes in the
Table."
Note
---
---
---
---
---
---
---
---
---
---
4-1
Fig.
Removal
No.
D2 Separation Sheet
D2 ---------------
↓ ↓
(3) (4)
A0C76_77DC
Note
---
---
↓
(5)