Advertisement
cables. Lights may be solid, but more than likely will flash as network traffic
comes through modem.
WiFi: Light will be solid green when wireless is enabled on the modem. By
default the modem will have this feature turned on. Unless we have personalized
the WiFi settings for the customer, the default SSID will be Geetel plus the last 4
characters of the modem's MAC address and the password will be the 12 character
MAC address found on the bottom of the modem. The password is case sensitive,
lower case letters and numbers will be used. If you are using this wireless feature
and the WiFi light is not on, push WiFi on/off button on front of modem for 5
seconds and wireless will enable. If you want wireless turned on for this modem
please call the support line 765-258-4357 for us to personalize it for you or use the
default SSID/Password settings described above after enabling WiFi on the
modem.
WPS: Wireless communication standard for connecting wireless equipment in
your home. There is a WPS button on the front of the modem that allows you to
use this WPS feature. Usually takes some past experience to get WPS to work
correctly.
DSL: This is your DSL sync system light. The light will flash at first and
eventually become a solid green light when your DSL modem is talking with our
DSL equipment.
INTERNET: Light will become a solid green light after the ADSL light is a solid
green light. Light becomes a solid green light once modem receives an IP address
from Geetel giving the modem an internet connection.
DO NOT HOLD IN RESET BUTTON ON DSL MODEM UNLESS
SPECIFIED BY GEETEL SUPPORT
Advertisement
