Audiovox Electronics PRO-9276i Owner's Manual

7 channel remote car starter

Advertisement

Quick Links

7 Channel Remote Car Starter
 2 Five Button Programmable RF Transmitters
 Seven Channel Receiver (capable of accepting 4 transmitters)
 Code Hopping Technology
 Combination Remote Start Safety Control/Valet/Programming Push-
Button LED Switch
 Safe Start RF Control (Double Push Of RF Transmitter)
 Selectable Automatic Timed Start Mode
 ( + ) and ( - ) Keyless Entry Outputs
 On-Board Start Relay
 On-Board Accessory Relay
 3 On-Board Ignition Relays
 On-Board Parking Light Relay
 Ignition 2 & 3 Relay Selectable On or Off During Cranking
 Ground Output While Running / Shock By-Pass / GM VAT Output
(relay required)
 Tach Signal Learning Circuit
 Two ( + ) and Two ( - ) Safety Shutdown Circuits
 Alarm By-Pass Output
 Channel 3 Output for Remote Trunk Release (relay required)
 Channel 4, 5, 6, & 7 Output to Control Optional Accessories
 Selectable Steady or Flashing Parking Lights for Run Indication
 Selectable Run Times
 Selectable Door Lock Output Pulse Timing
 Optional Illuminated Entry Output (Relay Required)
 Vehicle Horn Activation Output For R/S Annunciation
 External Activation Control Input
 Turbo Timer Mode
OPTIONS:
 Telematic Upgrade Ready
 Plug In Flash Logic By-Pass Capable
 Remote Power Window Control
 Remote Garage Door Interface
 Multiple Vehicle Capable
CAUTION! Be certain that the vehicle is outdoors before using this or any remote vehicle
starting device. A running engine produces dangerous carbon monoxide fumes
which can be harmful or fatal if prolonged exposure occurs. DO NOT remote
start the vehicle if the car is garaged.
Model PRO-9276i
Owner's Manual
FEATURES:
Page 1
128-8708
1 of 8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PRO-9276i and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Audiovox Electronics PRO-9276i

  • Page 1 Model PRO-9276i Owner’s Manual 7 Channel Remote Car Starter FEATURES:  2 Five Button Programmable RF Transmitters  Seven Channel Receiver (capable of accepting 4 transmitters)  Code Hopping Technology  Combination Remote Start Safety Control/Valet/Programming Push- Button LED Switch ...
  • Page 2 YOUR “CODE HOPPING“ TRANSMITTERS The transmitters included with your new remote start system use the most advanced and secure form of radio frequency transmission available on any current automotive remote system. Some of today’s sophisticated auto thieves use a device known as a code grabber, which will receive and store the signal from your keychain transmitter and re- transmit at a later time to unlock your system.
  • Page 3 NOTE: The feature that has been added to channel 3 will always be activated using the same transmitter button that remotely starts the vehicle. There is no way to move the channel 3 function to a different transmitter button. ADDITIONAL REMOTE FUNCTION (CHANNEL 4) This system has an additional feature that can be connected to a number of different optional accessories.
  • Page 4 PRLED SAFETY CONTROL SWITCH The pushbutton LED control switch allows you to temporarily disable the remote starting function of the system. This recommended whenever the vehicle is being serviced. To place the system in the service mode: 1) With the system disarmed/unlocked, and the ignition switch off Press and Hold the PRLED on.
  • Page 5 CAUTION! Be certain that the vehicle is outdoors before using this or any remote vehicle starting device. A running engine produces dangerous carbon monoxide fumes which can be harmful or fatal if prolonged exposure occurs. DO NOT remote start the vehicle if the car is garaged. To Remote Start The Vehicle: Press and release the trunk/key button of your keychain transmitter two times within 2 seconds.
  • Page 6 2. Shut off the vehicle using the keychain transmitter by pressing and releasing the trunk/ key transmitter button 2 times. 3. Within 10 seconds of step 2, activate the RF start command two times. (Push the trunk/ key button of your keychain transmitter 4 times). The parking lights will flash and the siren will chirp 4 times indicating the timed start mode is activated.
  • Page 7 THIS PAGE LEFT BLANK INTENTIONALLY Page 7 128-8708 7 of 8...
  • Page 8 © 2009 Audiovox Electronics Corporation, Hauppauge, NY 11788 128-8708 Page 8 128-8708 8 of 8...

Table of Contents