Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ATV FA4-120
Summary of Contents for ATV FA4-120
- Page 2 User’s Manual...
-
Page 3: Compliance Notice Of Fcc
INTERFERENCE-CAUSING EQUIPMENT REGULATIONS. ® The information in this manual is believed to be accurate as of the date of publication. ATV is not responsible for any problems resulting from the use thereof. The information contained herein is subject to change without notice. -
Page 4: Important Safeguards
User’s Manual Important Safeguards 1. Read Instructions 13. Damage requiring Service All the safety and operating instructions should be read before the Unplug this equipment from the wall outlet and refer servicing to appliance is operated. qualified service personnel under the following conditions: A. -
Page 5: Table Of Contents
Four-Channel Digital Video Recorder Table of Contents Chapter 1 — Introduction ..................1 Features ......................1 Technical Overview..................2 Chapter 2 — Installation ..................3 Package Contents ...................3 Required Installation Tools ................3 Connecting the Video Source................3 Connecting the Loop Through Video............4 Connecting Audio ...................4 Setting Unit for CVBS(SVHS) or VGA output ..........4 Connecting the Monitor..................5 Connecting the Spot Monitor .................5... - Page 6 User’s Manual Turning on the Power ...................14 Initial Unit Setup....................14 Quick Setup Screen ..................14 Normal Setup Screen..................16 System Information ..................16 Date/Time Setup ..................19 System Check Screen .................21 Storage Screen ....................22 System Log Screen..................24 System Shutdown ..................24 Configuring Input Devices ................25 Camera Setup Screen .................25 Alarm In Setup Screen.................26 Motion Detector....................27...
- Page 7 Four-Channel Digital Video Recorder Config Screen....................51 Clip Copy .....................51 Load Default Setup ..................53 Clear All Data....................53 Chapter 4 — Operation ..................55 Turning on the Power ...................55 Live Monitoring .....................55 PTZ Mode ....................56 Digital Zoom Mode..................57 Recording Video....................57 Recording Audio ...................58 Playing Recorded Video ................58 Arrow Buttons ....................58 Enter Button ....................59...
- Page 8 User’s Manual List of Illustrations Figure 1 — Typical DVR installation...................1 Figure 2 — DVR rear panel......................3 Figure 3 — Video input connectors....................3 Figure 4 — Video Loop Through connectors................4 Figure 5 — Audio In and Out connectors...................4 Figure 6 —...
- Page 9 Four-Channel Digital Video Recorder Figure 50 — Motion Detector Event Action (Alarm Out) setup screen........39 Figure 51 — Motion Detector Event Action (Notify) setup screen..........39 Figure 52 — Text-In Event Action (Record) setup screen............40 Figure 53 — Text-In Event Action (Alarm Out) setup screen...........41 Figure 54 —...
- Page 10 User’s Manual...
-
Page 11: Chapter 1 - Introduction
Four-Channel Digital Video Recorder Chapter 1 — Introduction Features Your color digital video recorder (DVR) provides recording capabilities for 4 camera inputs. It provides exceptional picture quality in both live and playback modes, and offers the following features: • 4 Composite Input Connectors •... -
Page 12: Technical Overview
User’s Manual Technical Overview Your DVR can replace both a time-lapse VCR and a multiplexer in a security installation. However, it has many features that make it much more powerful and easier to use than even the most advanced VCR. The DVR converts analog NTSC or PAL video to digital images and records them on a hard disk drive. -
Page 13: Chapter 2 - Installation
Four-Channel Digital Video Recorder Chapter 2 — Installation Package Contents The package contains the following: • Digital Video Recorder • Power Cord • User’s Manual (This Document) • RAS Software Diskettes and User’s Manual • Assembly Screws for Adding Hard Disk Drives Required Installation Tools No special tools are required to install the DVR. -
Page 14: Connecting The Loop Through Video
User’s Manual Connecting the Loop Through Video Figure 4 — Video Loop Through connectors. If you would like to connect your video source to another device, you can use the Loop BNC connectors. NOTE: The Loop BNC connectors are auto terminated. Do NOT connect a cable to the Loop BNC unless it is connected to another terminated device because it will cause poor quality video. -
Page 15: Connecting The Monitor
Four-Channel Digital Video Recorder NOTE: Set the CVBS(SVHS) or VGA selector switch before turning on the DVR. You cannot change the setting while the unit is running. Connecting the Monitor Connecting the Spot Monitor Figure 7 — Video Out connectors. Connect the SPOT monitor to either the Video Out or SVHS Out connector. -
Page 16: Connecting To The Network Port
User’s Manual Connecting to the Network Port Figure 9 — Network connector. The DVR can be networked using the 10/100Mb Ethernet connector. Connect a Cat5 cable with an RJ-45 jack to the DVR connector. The DVR can be networked with a computer for remote monitoring, searching, configuration and software upgrades. -
Page 17: Connecting Alarms
Four-Channel Digital Video Recorder To reset the unit, you will need a straightened paperclip: Turn the DVR off. Turn it on again. While the DVR is initializing, poke the straightened paperclip in the unlabeled hole to the right of the RS-232C connector. Hold the switch until all the LEDs on the Front Panel are lit. -
Page 18: Alarm Out
User’s Manual Alarm Out Figure 13 — Alarm Output connector strips. The DVR can activate external devices such as buzzers or lights. Mechanical or electrical switches can be wired to the NC (Normally Closed) and C (Common) connectors or NO (Normally Open) and C (Common) connectors. -
Page 19: Connecting The Power Cord
Four-Channel Digital Video Recorder Connecting the Power Cord Figure 16 — Power cord connector. Connect the power cord to the DVR and then to the wall outlet. WARNING: ROUTE POWER CORDS SO THAT THEY ARE NOT A TRIPPING HAZARD. MAKE CERTAIN THE POWER CORD WILL NOT BE PINCHED OR ABRADED BY FURNITURE. - Page 20 User’s Manual...
-
Page 21: Chapter 3 - Configuration
Four-Channel Digital Video Recorder Chapter 3 — Configuration NOTE: Your DVR should be completely installed before proceeding. Refer to Chapter 2 — Installation. Front Panel Controls Figure 17 — DVR front panel. Many of the buttons on the front panel have multiple functions. The following describes each button and control. -
Page 22: Copy Led
User’s Manual Copy LED The Copy LED is lit when data is being backed up using the internal CD-RW or the USB port. Camera Buttons (1 to 4) Pressing the individual camera buttons will cause the selected camera to display full screen. They are used to enter passwords. -
Page 23: Enter/Pause Button
Four-Channel Digital Video Recorder Enter/Pause Button This button selects a highlighted item or completes an entry that you have made. Pressing the button in the live monitoring mode freezes the current live screen, and the screen ENTER/PAUSE displays . Press the button again to return to the live monitoring mode. Pressing the button in the playback mode will pause the video, and the screen displays . -
Page 24: Turning On The Power
User’s Manual Turning on the Power Connecting the power cord to the DVR turns on the unit. The unit will take approximately 60 seconds to initialize. Initial Unit Setup Before using your DVR for the first time, you will want to establish the initial settings. This includes items such as time and date, display language, camera, audio, remote control, record mode, network and password. - Page 25 Four-Channel Digital Video Recorder The Quick Setup screen allows you to set up the most commonly used features of your DVR. Use the arrow buttons to move through the options. Pressing the button lets you make your selections. Highlight the box beside Quick Setup and press the button to toggle between On and Off.
-
Page 26: Normal Setup Screen
User’s Manual Normal Setup Screen Figure 20 — Normal Setup screen. Press the MENU button to enter the setup screen. If the Quick Setup screen appears, turn it off as described above. The Normal Setup screen gives you access to all the DVR’s setup screens. System Information Highlight System Information and press the button. -
Page 27: Figure 22 - System Information Change Screen
Four-Channel Digital Video Recorder Figure 22 — System Information Change screen. Highlight the box beside Site Description and press the button. A virtual keyboard displays. Figure 23 — Virtual keyboard. Use the arrow keys to highlight the first character you want in the Site Title and press the button. -
Page 28: Figure 24 - System Upgrade Screen
User’s Manual To upgrade the software, connect the USB device which containing the upgrade package file to the DVR. Highlight Upgrade… and press the button. The System Upgrade screen appears. The screen displays the upgrade package file name. NOTE: If the file system on the USB-IDE hard disk drive or USB flash drive is NOT FAT16 or FAT32 format, format the device using FAT16 or FAT32 format. -
Page 29: Date/Time Setup
Four-Channel Digital Video Recorder Date/Time Setup Highlight Date/Time in the Main menu and press the button. The Date/Time setup screen appears. Figure 25 — Date/Time setup screen. CAUTION: If you set a date and time that is older than some of your recorded images, any images with dates and times later than the new setting will be deleted. -
Page 30: Figure 26 - Holiday Setup Screen
User’s Manual Figure 26 — Holiday Setup screen. Highlight the box beside Date Format and press the button. A list of date formats appears. Highlight the format you wish to use and press the button. The choices are: MM-DD-YYYY DD-MM-YYYY YYYY-MM-DD MM/DD/YYYY DD/MM/YYYY... -
Page 31: System Check Screen
Four-Channel Digital Video Recorder System Check Screen Highlight System Check in the Main menu and press the button. The System Check setup screen appears. Figure 27 — System Check screen. Highlight the box under the On/Off heading and press the button. -
Page 32: Storage Screen
User’s Manual Storage Screen Highlight Storage in the Main menu and press the button. The Storage setup screen appears. Figure 28 — Storage screen. The Type field displays the type and capacity of storage devices. The Status field displays the device status or fault conditions. (Good, Disk Bad, S.M.A.R.T. Alert, High Temperature, or Not installed) NOTE: If the DVR senses S.M.A.R.T. -
Page 33: Figure 29 - S.m.a.r.t. Alert Setup Screen
Four-Channel Digital Video Recorder Figure 29 — S.M.A.R.T. Alert setup screen. Your DVR shows the conditions of Hard Disk Drives when the installed IDE hard disk drives support S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) Monitoring program. Highlight the box beside Use. Press the button to toggle between On and Off. -
Page 34: System Log Screen
User’s Manual System Log Screen Highlight System Log in the Main menu and press the button . The System Log screen appears. Figure 30 — System Log screen. The System Log screen displays a record of various events logged by the DVR. The list shows the dates and times the system was turned ON and OFF, system was restarted, recording was started or stopped, playback was started or stopped, setup changes were made, and data banks were cleared. -
Page 35: Configuring Input Devices
Four-Channel Digital Video Recorder Configuring Input Devices You can configure the video, audio and remote control devices connected to the DVR. Figure 31 — Device menu screen. Camera Setup Screen Highlight Camera in the Main menu and press the button. The Camera setup screen appears. Figure 32 —... -
Page 36: Alarm In Setup Screen
User’s Manual You can assign titles to each camera by highlighting the Title heading and pressing the button. A virtual keyboard allows you to enter camera names. Selecting the PTZ Device box causes a list of controllable cameras to display. Select your camera from the list and press the button. -
Page 37: Motion Detector
Four-Channel Digital Video Recorder Motion Detector Figure 35 — Motion Detector setup screen. Your DVR has built-in video motion detector. Video motion detector can be turned On or Off for each camera. Highlighting the box under the Sensitivity heading allows you to adjust the DVR’s sensitivity to motion. -
Page 38: Text-In Setup Screen
User’s Manual NOTE: You can activate or deactivate 4 cells at a time using the button. Once 4 cells are highlight, you can select individual cells in it using each camera number buttons. Exit with save — Closes the menu after saving the changes. Exit without save —... -
Page 39: Alarm Out Setup Screen
Four-Channel Digital Video Recorder Highlight the box beside Delimiter and pressing the button displays a virtual keyboard. Enter the character string divides each text-in line. The line feed character ^J has been entered as a default, and the user can enter additional delimiters as required. When using multiple delimiters, each delimiter must be separated with a space. -
Page 40: Audio Setup Screen
User’s Manual Figure 39 — Alarm Out Schedule screen. You can select individual blocks of time, entire days of the week, entire blocks of time or the entire schedule. Select a specific block of time by highlighting it. Select an entire day by highlighting the day of the week or Holiday on the left of the screen. -
Page 41: Rs232/Rs485 Setup Screen
Four-Channel Digital Video Recorder Highlight the box beside Mute and press the button. This toggles between On and Off. When it is On, the DVR will NOT play live or recorded audio. The DVR supports 4 Audio inputs. You can set up each input on the Audio Setup screen. When it is On, the DVR will play live audio through the attached speaker when it displays live video. -
Page 42: Configuring Recording Settings
User’s Manual NOTE: If networking is configured by the external modem, Text-In cannot be set for RS232 field. In the Network Setup menu, set up the DVR for LAN connections first. Configuring Recording Settings NOTE: When the DVR is recording video, the REC LED on the front panel is lit and a red dot appears on the monitor. -
Page 43: Time-Lapse Record Mode Setup Screen
Four-Channel Digital Video Recorder Pressing the button on the front panel enters the Panic Recording mode. You can program PANIC the recording speed and quality when the DVR is in the Panic Recording mode. On Panic Recording Speed can be set from 0.5 to 30 ips (25 ips PAL), and On Panic Recording Quality can be selectable from Very High, High, Standard and Low. -
Page 44: Time-Lapse Recording Schedule
User’s Manual Highlight the box under the Quality heading and press the button. A drop-down list appears. You can select from Very High, High, Standard and Low image quality. All other variables being equal; Very High will require 300% more hard disk space than Standard, High will require 200% more, and Low 50% less. -
Page 45: Pre-Event Recording Setup Screen
Four-Channel Digital Video Recorder • You can change the entire calendar by placing the cursor in the upper left-hand box (above “S” and to the left of the time line) and pressing the button to toggle the entire calendar On and Off. -
Page 46: Event Action Setup
User’s Manual Event Action Setup You can program the DVR to record, activate the alarm output and/or notify the remote site whenever sensor, motion, text-in or video loss events are detected. Highlight the Alarm-In Action, Motion Action, Text-In Action or Video Loss Action in the Event Action menu and press the button. -
Page 47: Alarm In Event Action (Alarm Out) Setup Screen
Four-Channel Digital Video Recorder Alarm In Event Action (Alarm Out) Setup Screen The DVR can be set to react to events differently by activating an internal buzzer or external alarms. Figure 47 — Alarm In Event Action (Alarm Out) setup screen. Highlight the Sched box and press the button. -
Page 48: Motion Detector Event Action (Record) Setup Screen
User’s Manual Highlight the Sched box and press the button. A schedule screen appears. Set the schedule as described earlier. Highlight the Notify box and press the button. This toggles between On and Off. When it is On, the DVR notifies the remote site when certain events occur based on a defined schedule. Motion Detector Event Action (Record) Setup Screen The DVR can be set to react to motion detector differently. -
Page 49: Motion Detector Event Action (Alarm Out) Setup Screen
Four-Channel Digital Video Recorder Motion Detector Event Action (Alarm Out) Setup Screen The DVR can be set to react to motion events differently by activating an internal buzzer or external alarms. Figure 50 — Motion Detector Event Action (Alarm Out) setup screen. Highlight the Sched box and press the button. -
Page 50: Text-In Event Action (Record) Setup Screen
User’s Manual Highlight the Sched box and press the button. A schedule screen appears. Set the schedule as described earlier. Highlight the Notify box and press the button. This toggles between On and Off. When it is On, the DVR notifies the remote site when certain events occur based on a defined schedule. Text-In Event Action (Record) Setup Screen The DVR can be set to react to text input from the Text-in device. -
Page 51: Text-In Event Action (Alarm Out) Setup Screen
Four-Channel Digital Video Recorder Text-In Event Action (Alarm Out) Setup Screen The DVR can be set to react to text-in by activating an internal buzzer or external alarms. Figure 53 — Text-In Event Action (Alarm Out) setup screen. Highlight the Sched box and press the button. -
Page 52: Video Loss Event Action (Record) Setup Screen
User’s Manual Highlight the Sched box and press the button. A schedule screen appears. Set the schedule as described earlier. Highlight the Notify box and press the button. This toggles between On and Off. When it is On, the DVR notifies the remote site when it has text input from a text-in device based on a defined schedule. -
Page 53: Video Loss Event Action (Alarm Out) Setup Screen
Four-Channel Digital Video Recorder Video Loss Event Action (Alarm Out) Setup Screen The DVR can be set to react to video loss differently by activating an internal buzzer or external alarms. Figure 56 — Video Loss Event Action (Alarm Out) setup screen. Highlight the Sched box and press the button. -
Page 54: Display Setup
User’s Manual Highlight the Sched box and press the button. A schedule screen appears. Set the schedule as described earlier. Highlight the Notify box and press the button. This toggles between On and Off. When it is On, the DVR notifies the remote site when it loses video input from a camera based on a defined schedule. -
Page 55: Main Monitoring Setup Screen
Four-Channel Digital Video Recorder Main Monitoring Setup Screen You can adjust the display dwell time for each camera displayed on the main monitor. You also can set the video of event-detected camera to be displayed on the main monitor during the preset dwell time. -
Page 56: Network Setup Screen
User’s Manual Network Setup Screen In the Network Setup screen you can set up the DVR for LAN and modem connections. Figure 60 — Network Setup screen. Highlight the box beside Connection. Press the button to toggle between LAN and Modem. Highlight the box beside Admin Password and press the button. -
Page 57: Lan Setup Screen
Four-Channel Digital Video Recorder You can program the image quality for transferring to the RAS (Remote Administration System). Highlight the box beside Remote Quality and press the button. The image quality can be selectable from Very High, High, Standard and Low. LAN Setup Screen Figure 61 —... -
Page 58: Modem Setup
User’s Manual Modem Setup Figure 62 — Modem Setup screen. The Use field displays the available modem type, External Modem. Highlight the box beside Baud Rate and press the button. A list of baud rates ranging from 300 to 115,200 appears. Highlight the box beside Data Bit and press the button. -
Page 59: Callback Center Setup Screen
Four-Channel Digital Video Recorder Callback Center Setup Screen Figure 63 — Callback Center Setup screen. The DVR can be set up to contact a computer running RAS (Remote Administration System) on a LAN when an event occurs. Also it can be set up to dial a pager with a numeric message when an event occurs if you have a modem connected to the DVR. -
Page 60: Password Setup Screen
User’s Manual When an event occurs, the DVR will dial the pager and leave a four-digit number. The first three digits are the site ID number and the last digit is the type of event (1: Alarm In, 2: Motion Detection and 3: Video Loss). -
Page 61: Config Screen
Four-Channel Digital Video Recorder NOTE: The Admin and User passwords are composed of up to eight digits using the camera buttons. The default Admin password is 4321. CAUTION: Write down the new password and save it in a secure place. If the password is forgotten, the unit must be reset using the Factory Reset Button and all data settings will be lost. -
Page 62: Figure 66 - Clip Copy Screen
User’s Manual Figure 66 — Clip Copy screen. To select the type of the drive to use for back up, highlight the box on the top and press the button. A drop-down list of available drives appears. You can select IDE CD-RW, USB HDD, USB CD-RW or USB Flash Memory. -
Page 63: Load Default Setup
Four-Channel Digital Video Recorder CAUTION: Do NOT use poor quality CD-R or CD-RW discs – scratched or damaged in any way. CAUTION: Do NOT disconnect the USB cable or the power from the external drive while backing up video. If the external drive is shut down or the USB cable is disconnected while backing up, THE DVR SYSTEM MAY NOT WORK NORMALLY OR THE EXTERNAL DRIVE COULD BE DAMAGED, and you will get an error message the next time you try to back up. - Page 64 User’s Manual...
-
Page 65: Chapter 4 - Operation
Four-Channel Digital Video Recorder Chapter 4 — Operation NOTE: This chapter assumes your DVR has been installed and configured. If it has not, please refer to Chapter 2 and 3. The DVR’s controls are similar to a VCR. As with a VCR, the main functions are recording and playing back video. -
Page 66: Ptz Mode
User’s Manual PTZ Mode The DVR will control cameras with Pan, Tilt and Zoom capabilities. Pressing the button enters the PTZ mode. You can control the camera using front panel control buttons or by setting up presets. Press the arrow buttons to pan left and right, and tilt the camera up and down. Use to zoom in or zoom out. -
Page 67: Digital Zoom Mode
Four-Channel Digital Video Recorder Figure 69 — Preset view screen. Digital Zoom Mode You can enter the Digital Zoom Mode by pressing the button in the PTZ mode. When the PTZ device is not installed, pressing the button in the live monitoring mode enters the Digital Zoom Mode directly. -
Page 68: Recording Audio
User’s Manual Recording Audio If the DVR was set up to record audio, it will record audio when video is recording. NOTE: Make certain you comply with all local and federal laws and regulations when recording audio. Playing Recorded Video Once video has been recorded, you can view it using the arrow buttons. -
Page 69: Enter Button
Four-Channel Digital Video Recorder NOTE: Entering Fast/Backward Playback mode from Live Monitoring mode can be password protected. Enter Button Pressing the button will pause the video on the screen. The screen displays . ENTER/PAUSE Camera Buttons (1 to 4) Pressing a camera button will display that camera full screen. QUAD/SEQ Button When playing back video, you can change the display format from full screen to quad (2x2) mode by pressing the... -
Page 70: Digital Zoom Playback Mode
User’s Manual Digital Zoom Playback Mode You can enter the Digital Zoom Playback mode by pressing the button in the Playback mode. Once you press the button in the playback mode, the image pauses and a bright small box is laid over the image. -
Page 71: Searching Video
Four-Channel Digital Video Recorder Searching Video Pressing the button in the playback mode displays the Search Menu. MENU Figure 73 — Search Menu. • Go to the First — Displays the first recorded image • Go to the Last — Displays the last recorded image •... -
Page 72: Calendar Search
User’s Manual Calendar Search Figure 75 — Calendar Search screen. Days with recorded video display on the calendar with white numbers. Highlight a day using arrow buttons and press the button to select it. A time bar will display at the bottom of the calendar. Hours in which video was recorded will be highlighted with blue. -
Page 73: Figure 77 - Event Search (By Event) Screen
Four-Channel Digital Video Recorder The DVR maintains a log of each time the Alarm Input port is activated. The Event Log screen displays this list. Highlight the event for which you would like to see video. Pressing the button will extract the event video and display the first image of the event. Pressing the arrow button will start playing the “event”... - Page 74 User’s Manual When you select the Search by Camera, select the target cameras and event options. When you select the Search by Event, select event options for each device. NOTE: When selecting Text-In as the event option, search text-in events that have the identical value to any specific transaction number entered in the Transaction field.
-
Page 75: Appendix A - Usb Hard Disk Drive Preparation
Four-Channel Digital Video Recorder Appendix A — USB Hard Disk Drive Preparation Preparing the USB-IDE hard disk drive in Windows 2000 NOTE: Preparing a USB-IDE hard disk drive under Windows XP is almost identical to Windows 2000. Connect the USB-IDE hard disk drive to your computer using the USB Cable. Turn on your computer. - Page 76 User’s Manual 10. In the Create DOS Partition or Logical DOS Drive menu, choose “1. Create Primary DOS Partition.” And Type “Y” to use all available space and hit the enter key. Hit ESC to exit the screen after the USB-IDE hard disk drive partition is created. 11.
-
Page 77: Appendix B - Troubleshooting
Four-Channel Digital Video Recorder Appendix B — Troubleshooting Problem Possible Solution • Check power cord connections. No Power • Confirm that there is power at the outlet. • Check camera video cable and connections. • Check monitor video cable and connections. No Live Video •... -
Page 78: Appendix C - Connector Pin Outs
User’s Manual Appendix C — Connector Pin Outs I/O Connector Pin Outs Input Output AI (1 to 4) Alarm Inputs 1 to 4 Chassis Ground Alarm Reset In Normally Closed Common Normally Open RS485 Connector Pin Outs Master Unit Slave Unit RX-/TX- →... -
Page 79: Appendix D - Map Of Screens
Four-Channel Digital Video Recorder Appendix D — Map of Screens... -
Page 80: Appendix E - Specifications
User’s Manual Appendix E — Specifications VIDEO Signal Format NTSC or PAL (auto detect) Composite: 4 looping inputs, 1 Vp-p, auto-terminating, Video Input 75 Ohms Composite: One (BNC), 1 Vp-p, 75 Ohms Monitor Outputs SVHS: One (Y/C) Analog RGB: One (VGA) Video Resolution 720x480 (NTSC), 720x576 (PAL) Playback/Record Speed... - Page 81 Four-Channel Digital Video Recorder STORAGE Primary Storage EIDE hard disk drive (up to 3) Built-in CD-RW drive Backup Storage USB hard disk drive or USB CD-RW drive GENERAL Dimensions (W x H x D) 16.9 x 3.5 x 14 (430mm x 88mm x 355mm) Unit Weight 17.64 lbs.