1. Manuals
  2. Brands
  3. Ultratec Manuals
  4. Ice Maker
  5. Dry Icer
  6. Operator's manual

Ultratec Dry Icer Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Dry Icer
Operator's Manual
www.ultratecfx.com
VER. 04.11.12

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Dry Icer and is the answer not in the manual?

Questions and answers

Summary of Contents for Ultratec Dry Icer

  • Page 1 Dry Icer Operator’s Manual www.ultratecfx.com VER. 04.11.12...

  • Page 2: Table Of Contents

    The ‘Dry Ice’ Fogger Principal ............ 5 Warnings ..................5 Maintenance ................6 Solid Carbon Dioxide ..............6 Guidance for Users ..............6 Warranty ..................7 Contact Information ..............7 Note: Please read entire manual before operating the Dry Icer www.ultratecfx.com...

  • Page 3: Warning

    4. Never handle dry ice with bare hands. Thick gloves must be worn. 5. Unplug the Dry Icer machine when pouring water into the unit. 6. Do not swallow solid CO2 (e.g. practical jokes with a piece of dry ice in a liquid to give a ‘laboratory effect’).

  • Page 4: Technical Specifications

    Technical Specifications Model: Dry Icer Part Number: CLF 1810 Dry Icer / 120 Volt CLF 1815 Dry Icer / 240 Volt Length: 21in 53.3cm Width: 13.9in 35.3cm Height: 20.8in 52.8cm Power Rating: 120 Volt A.C. 50/60 Hz. 12 Amps. 240 Volt A.C. 50/60 Hz. 6 Amps.

  • Page 5: The Dry Icer

    The Dry Icer The Dry Icer is compact and portable dry-ice fogger. It is made of a durable corrosion resistant polyethylene that will give trouble-free use while producing a thick white low-lying fog. The ‘Dry Ice’ Fogger Principal ‘Dry-Ice’ is a solid form of carbon dioxide (CO2). The term dry-ice is used because of its ability to sublimate; the process of transforming from a solid directly to a gas without any liquid formation.

  • Page 6: Maintenance

    Maintenance 1. Keeping lid screws lightly oiled will protect them allow them to operate easily. 2. Make sure no dry ice is on the rubber lid seal. This will allow gas escape through the lid gasket. 3. Do not pour cold water directly onto hot heater element as this will cause premature failure. 4.

  • Page 7: Contact Information

    RA number clearly marked on the outside of the box. Warning: Ultratec Special Effects considers all of it’s product to be safe for use in the application it was intended. Ultratec Special Effects takes no responsibility for misuse or incorrect use. Always refer to the Product Manual for proper use.

Table of Contents