1. Manuals
  2. Brands
  3. Lithionics Battery Manuals
  4. Other
  5. NeverDIE
  6. User manual

Lithionics Battery NeverDIE User Manual

12v engine start battery
Hide thumbs Also See for NeverDIE:
Table of Contents

Advertisement

Quick Links

Download this manual
12V Engine Start Battery w/NeverDie®
Voltage: 12.8V (Nominal), 10.8V (Min.), 14.4V (Max.)
 Discharge Rate: 80A Max. Continuous for BMS Model 4M, and 100 Amps for BMS
Model 8M (Contact Lithionics Battery to Confirm Your BMS Installed)
 Charge Rates:
12V or GT12V Series: 1C (Max) or 1 Times Amp Hours) Example: a 12V40A...MAX.
Charge Rate= 1C X 40 = 40 Amps
GT Series = 2C or 2 Times Amp Hour Capacity
Operating Conditions: Do Not Operate Under-The-Hood Until You Confirm the
Temperature and Air-Flow Characteristics of Your Vehicle (See Section 2.3)
 Operating Temperature Range: 12V and GT12V Series: 25F to 125F
GT Series: 15F to 125F
 Storage Temperature Range: -4F to 95F
 Water Resistant
 REMOVE THE BATTERY FROM THE PACKAGING AND IMMEDIATELY USE A VOLT
METER TO ENSURE THE BATTERY IS OFF BEFORE ATTEMPTING ANY INSTALLATION.
AFTER INSTALLATION SIMPLY TURN THE BATTERY ON.
User Manual
12VNDE-R11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NeverDIE and is the answer not in the manual?

Questions and answers

Larry Miller
June 12, 2025

The blue ring push button is blinking. What does that indicate?

0

Related Manuals for Lithionics Battery NeverDIE

Summary of Contents for Lithionics Battery NeverDIE

  • Page 1 Voltage: 12.8V (Nominal), 10.8V (Min.), 14.4V (Max.)  Discharge Rate: 80A Max. Continuous for BMS Model 4M, and 100 Amps for BMS Model 8M (Contact Lithionics Battery to Confirm Your BMS Installed)  Charge Rates: 12V or GT12V Series: 1C (Max) or 1 Times Amp Hours) Example: a 12V40A…MAX.

  • Page 2: Table Of Contents

    3. NeverDIE Battery Operation 3.1 - Connecting Your NeverDIE Battery 3.2 – Terminal Tightening Torque 3.3 – NeverDIE Pushbutton operation 3.4 - Optional NeverDIE Wireless Remote Operation 4. Charging Your Battery 4.1 - Supported Chargers 4.2 - Connecting Your Battery 5.

  • Page 3: Operating Environment

    “SUBMIT”. The NeverDie® Battery Warranty Does Not Cover Damage to the Battery By Short Circuiting the Terminals. Be sure the battery is OFF, using a volt meter before installation.

  • Page 4: Neverdie Battery Operation

    It is the responsibility of the user to ensure the suitability of a lithium ion battery in your installation. Contact Lithionics Battery to obtain a free temperature sensor shown at left to install in your current vehicle to measure actual temperatures prior to purchasing a battery.
  • Page 5 With the optional Wireless Remote you can turn the battery on/off while being up to 100 feet away. To turn battery output ON To turn battery output OFF Press the UNLOCK symbol on the remote. Press the LOCK symbol on the remote. Lithionics Battery LLC |2013...

  • Page 6: Charging Your Battery

    Lithionics Battery 12V engine start batteries can be charged with either a 12V rated alternator in proper working order or a Lithionics Battery LiFePO4 Charger. Failure to do so will void the battery’s warranty. Other chargers are factory approved but you must report that charger to the factory in an email request to your sales representative or info@lithionicsbattery.com...

  • Page 7: Storing Your Battery

    Means the Battery Will Enter Sleep Mode with a Power Reserve But Only for a Limited Time Before Recharging is Required. 1. Fully charge your battery. 2. Press the NeverDIE switch for 5 FULL SECONDS and confirm the battery is OFF. Lithionics Battery LLC |2013...

  • Page 8: Troubleshooting

    B. Wrong charger connected. section 3.3. B. Verify the correct charger is applied. See section 4. Poor performance A. Battery is not charged. A. Charge battery. See B. Wrong application. section 4. B. See front page for operating specifications. Lithionics Battery LLC |2013...

Table of Contents