Table of Contents
Advertisement
Introduction
Key Features and Benefits
•
10000mAh battery capacity supports multiple full
charges to iPhones, iPads, tablets , smartphones
and may other USB powered electronic devices.
•
Two USB charging ports provide 2.4A and 1.5A
power outs, fast charging dual device
simultaneously.
•
Built-in smart detection circuit maximizes the
charging efficiency and device compatibility.
•
Enhanced 1.5A recharging input, speeds up the
power bank recharging process and shortens the
recharge time effectively.
•
4-level battery power LED indicator displays the
remaining battery capacity, addition LED unit
can use as light source.
•
Multiple power safety features - short-circuit
protection, over-discharge protection.
04-0974A
10000mAh Rapid Charging
Dual-Port Battery Power Bank
User Reference Guide
1
Advertisement
Table of Contents
Summary of Contents for SIIG 10000mAh Rapid Charging Dual-Port Battery Power Bank
- Page 1 10000mAh Rapid Charging Dual-Port Battery Power Bank User Reference Guide Introduction Key Features and Benefits • 10000mAh battery capacity supports multiple full charges to iPhones, iPads, tablets , smartphones and may other USB powered electronic devices. • Two USB charging ports provide 2.4A and 1.5A power outs, fast charging dual device simultaneously.
-
Page 2: Package Contents
LOT Number Sticker For future product return or exchange, this LOT number is required. Please keep it for your reference. LOT Number Part Number Package Contents • 10000mAh Rapid Charging Dual-Port Battery Power Bank • USB charging cable (USB Type A to Micro- B) •... -
Page 3: On/Off Button
USB Type A Micro-B Figure 2: USB Charging Cable • On /Off button: - For checking remaining battery level Press once to turn the LED Power Indicator on for displaying the battery level; LED Power Indicator will go off after 15 seconds automatically. - For charging devices Press once to power on the power bank and start the charging process;... -
Page 4: Charging The Power Bank
• Power output (5V-1.5A) : Connects smartphones or other USB powered portable devices that requires less charging power here • Recharging input (Micro-B): Connects to a Computer's USB port or USB wall charger (not included) to charge the Power bank •... -
Page 5: Charging Devices
The Power Bank's LED indicator will light up to indicate the recharging process has begun. When the Power Bank is fully charged, all the four LED indicators will be lit. It takes approximately 5-6 hours to fully charge the Power Bank. The actual recharging time varies depending on the Power Bank's remaining battery level and/or the external power source. - Page 6 USB Type A ** The power bank could charge two devices simultaneously. Figure 4 Notice • Do not use the power bank to charge any device while in recharging process • In case the Power bank fails to charge, please check the battery level and corrective connections.
-
Page 7: Technical Support And Warranty
Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request will be processed, if the product is determined to be defective, an RMA number will be issued. -
Page 8: Product Name
10000mAh Rapid Charging Dual-Port Battery Power Bank is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. All other names used in this publication are for identification only and may be trademarks of their respective owners.
Need help?
Do you have a question about the 10000mAh Rapid Charging Dual-Port Battery Power Bank and is the answer not in the manual?
Questions and answers