Thank you for purchasing Beat-Sonic USA Shark Fin AM/FM Antenna FDA51 Series.
Please read carefully and follow these instructions before installing this product.
Features
Allows shark- n antennas on vehicles originally equipped with pole antennas.
Helical antenna wire to ensure maximum radio signal.
Easy installation using provided double sided tape.
Rubber lining ensures compability to many applications to match vehicle's roof curve.
Not having to worry about the e ect car washes and low ceiling garages have on the antenna.
Adds a luxury and sophisticated look to your vehicle.
For Safe Operation
Please take the following precautions during installation and operation of this antenna to
precent accidents resulting in injury or death by re or electrical shock.
- This antenna is only compatible for AM/FM signals.
- The joining terminal is to be connected to the base of the factory antenna only.
- Do not disassemble or alter the antenna. This will also void warranty.
Beat-Sonic USA
14778 Beach Blvd. La Mirada, CA 90638
Tel: 714-994-1085 Fax: 714-994-1085
URL: htt://www.beatsonicusa.com E-mail: info@beatsonicusa.com
User's Manual
Speci cation
Reception Frequency:
FM (76.0MHz - 108.00MHz) AM (530KHz - 1,710KHz)
Antenna Form:
Helical Antenna
Installation Method:
Joining terminal to base of factory antenna
Unit Dimensions (mm):
Attachment Method:
Using 3M double-sided tape
Screw Type:
Screw
Contents
Antenna Cable
Joining Terminal
Double-Sided Tape
Shark- n Antenna Unit
M5 Screw
Alcohol
Cleaner