Aerial Connection; Power Connection; Using Usb Media; Usb Memory Connection - LENCO DVL-2694 BLACK Operating Instructions Manual

Aerial Connection

• Connect the aerial to the

Power Connection

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains. Plug the power cable to the mains socket outlet.

Using USB Media

• You can connect USB devices to your TV by using the USB input of the TV. This feature allows you to display/
play JPG, MP3 and video files stored on a USB stick.
• It is possible that certain types of USB devices (e.g. MP3 Players) may not be compatible with this TV.
• You should back up your files before making any connections to the TV set in order to avoid any possible
data loss. Note that the manufacturer will not be responsible for any file damage or data loss.
• Do not pull out USB module while playing a file.
CAUTION: Quickly plugging and unplugging USB devices, is a very hazardous operation. Do not
repeatedly quickly plug and unplug the drive. This may cause physical damage to the USB player and
especially the USB device itself.

USB Memory Connection

IMPORTANT: The TV should be switched off while plugging or unplugging a USB device. Plug your
USB devices to the USB input of the TV. You can connect a USB device to your TV by using the USB input
of the TV.
Note: It is possible certain types of hard disk drives are not supported.
AERIAL INPUT (ANT) socket located at the rear of the TV.
SIDE VIEW
USB
5Vdc
Max:500mA
English - 51 -
USB MEMORY