Assembly Instruction Filing the Edges of the Chassis Bottom Note Direction File and round off the edges facing the bottom to prevent battery tape from tearing. SPR-S1C603 Bulkhead Installation M3x6mm SPR-S1P401 M3x8mm SPR-S1P401 SPR-S1P401 SPR-S1P401 Flat Head Screw M3x8mm M3x8mm SPR-S1A201 Flat Head Screw M3x6mm SPR-S1P401...
Rear Suspension Installation Note Direction SPR-S1P402 Flat Head Screw M3x8mm SPR-S1P402 M3x8mm M3x8mm Suspension Mount Toe Angle Adapter (SPR-SIP402) In 2.5° In 3.0° (Standard) In 3.5° Drive Shaft Assembly (50) Make SPR-R1A108 50mm...
Steering Rod Installation Shock Parts Assembly SPR-R1A121 Make Shock Shaft 28mm SPR-R1P309 SPR-R1A121 E Clip 2mm SPR-S1P403 Shaft Guide SPR-R1A126 SPR-R1A126 SPR-R1P322 SPR-R1P309 O-ring Guide SPR-R1P308 SPR-R1P308 Silicone oil SPR-R1P321 #500 Shock Piston (Standard) SPR-R1P315 Bladder 12x3.5mm O-ring Hold the shock with the Position the piston with the shock tool as shown shock tool for setting the...
Front Body Mount Installation Flat Head Screw M3x8mm Lock Nut M3 SPR-R1P316 SPR-R1P313 SPR-R1P313 M3x8mm M3x8mm Bumper Installation M3x8mm SPR-R1P313 Flat Head Screw M3x8mm SPR-R1P326...
M3x3mm Rear Body Mount Installation SPR-R1P316 M3x3mm SPR-R1P316 SPR-R1P316 SPR-R1A122 Button Head Screw M3x8mm SPR-R1P316 M3x8mm Set Screw M3x3mm SPR-R1A122 Pin 2x10mm M3x8mm Radio Connections All electronics shown are not included 540 type Electric Motor Fan 30mm Antenna Receiver Electronic Speed Control Battery Steering Servo...
Steering Servo Assembly M3x12mm SPR-R1P312 Button Head Screw M3x12mm Not Included Flat Head Screw M3x8mm M3x6mm Button Head Screw M3x6 M3x6mm Ball Stud 4.7x5mm Ball Stud 4.7x5mm M3x8mm KO Sanwa F- Futaba With steering in neutral position, make sure the steering rod is at a 90d angle as shown. SPR-R1P310 Steering Servo Installation Flat Head Screw M3x6mm...
R/C Unit Installation M3x12mm SPR-R1P310 Button Head Screw M3x12mm SPR-R1P327 Flat Head Screw M3x6mm Not Included SPR-R1P313 M3x6mm Not Included Not Included M3x6mm Motor Installation M3x12mm Button Head Screw M3x12mm Not Included Button Head Screw M3x8mm M3x8mm Use this for mounting the motor when a small Adjust motor position for smooth gear mesh.
Need help?
Do you have a question about the R1 and is the answer not in the manual?
Questions and answers