Installation and Operating Instructions Hot Plate Smart General 0.1 Introduction These operating instructions describe the operation and maintenance of the appliance and serve as an important source of information and reference. Knowledge of all the safety instructions and handling instructions contained herein are a prerequisite for safe and proper use of the appliance.
Installation and Operating Instructions Hot Plate Smart Warning. This symbol indicates hazards that could lead to injuries. Danger. This symbol indicates hazards from electrical current. Note. Instructions marked by this symbol should be paid particular attention. Tip. This symbol gives the user information which must be observed for efficient and trouble-free operation of the appliance.
Installation and Operating Instructions Hot Plate Smart No warranty can be granted: § for parts subject to natural wear and tear, § damages due to impact, § effects of moisture, § damage due to incorrect operation, § modification of functions, §...
Installation and Operating Instructions Hot Plate Smart 1.1 General The appliance is built according to the state of the art. Nevertheless, the appliance could still cause dangers when used improperly or not for the intended purpose. Knowledge of the contents of the operating instructions is a prerequi- site to protect you from danger and to avoid errors and thus operate the appliance safely and trouble-free.
Hot Plate Smart 1.3 Use The Hot Plate Smart is intended only for keeping prepared meals warm. Operational safety of the appliance is only guaranteed when the operating instructions are followed. § Any other use than keeping prepared meals warm is prohibited.
Installation and Operating Instructions Hot Plate Smart 2.3 Storage Packages should be kept closed until installation and stored under observance of the labels displayed on the outside. Only store the packages under the following condi- tions: § Do not store outdoors §...
Installation and Operation 4.1 Installation The appliance is designed for installation in the Professional livecookintable. The segment ridges must be inserted, set to the necessary spacing and tightened with the appropriate clamping screws. Use the appliance handles to insert the appliance safely in the opening in the table.
§ It must be installed in such a way as to ensure electrical touch protection! 4.2 Operation The Hot Plate Smart is set and operated by the touch control panel mounted at the front. The four buttons serve for setting, quick selection of preset values as well as parameterisa- tion.
Page 11
Installation and Operating Instructions Hot Plate Smart As long as the Hot Plate Smart displays remaining heat above 40°C after switching off, the temperature display of the touch control panel flashes. Do not place meals directly on the surface. All meals should always be placed on the Hot Plate Smart in appropriate vessels.
§ Do not use aggressive cleaning agents and make sure that no water pene- trates the appliance. § Do not use abrasives. These could scratch the surfaces of the Hot Plate Smart. § Do not clean the pactan joint between the frame and the glass ceramic with pointed objects.
Installation and Operating Instructions Hot Plate Smart 5.3 Possible Malfunctions Problem Cause Remedy No function Mains plug not plugged correct- Pull out mains plug and plug in correctly. Fuse of the power supply has Check fuse, test appliance on tripped.