1. Manuals
  2. Brands
  3. CineRAID Manuals
  4. Storage
  5. CR-H232
  6. User manual

CineRAID CR-H232 User Manual

2bay dual sata drive dock/stand-alone duplicator
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

CineRaid CR-H232
2Bay Dual SATA Drive Dock/Stand-Alone
Duplicator

USER MANUAL

for Easy Plug and Play with USB 3.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CR-H232 and is the answer not in the manual?

Questions and answers

Summary of Contents for CineRAID CR-H232

  • Page 1: User Manual

    CineRaid CR-H232 2Bay Dual SATA Drive Dock/Stand-Alone Duplicator USER MANUAL for Easy Plug and Play with USB 3.0...

  • Page 2: System Requirement

    One Touch Clone/Duplicate button. It is also designed with a straight forward, uncomplicated USB 3.0 plug-and-play interface. The CR-H232 Dual Drive Dock/Stand-Alone Duplicator is compatible with Windows 8/7,Vista, XP, 2000, Mac and Linux operating systems. Please read this manual carefully before using this device.

  • Page 3: Package Contents

    Apple G processor, 64MB RAM · Mac OS 9.1, 9.2, 10.1.5, 10.2, 10.3 or above · Active USB port 4.0 PACKAGE CONTENTS ·1 X CR-H232 HDD Docking Station ·1 X Power Adapter ·1 X User manual ·1 X USB 3.0 cable 5.0 Hardware Setup...
  • Page 4 Device Mode (USB 3.0 to SATA External Dual Hard Drive) · Install your SATA hard drive properly to the port connector on the docking station. ·Connect the docking station to your computer via USB cable.
  • Page 5 · Connect the power adapter to the enclosure and power up the docking station. ·The computer should now detect the new hardware. For Windows2000/XP/VISTA/7/8, driver setup necessary. Please proceed to step 6.0 to format your drive. Duplicator Mode ·Install 2 hard drives into the docks. Make sure to place the drive with the data you want copied (Source) into the “Source”...
  • Page 6 Silkscreen 100% LED Color Green Yellow Orange Solid LED for every 25%done Duplication started incrementally Duplication in progress LED moving back and forth Duplication Complete All LED remain constantly on Note: Can`t connect the docking station to your computer by USB cable for duplicator mode.
  • Page 7 skip to 6.2) 6.1 For an un-partitioned or un-formatted new drive, it normally does not automatically appear in “My Computer” the first time. Please follow these steps: Windows 2000/XP/VISTA/7/8 ·Right mouse click on ”My computer”, Choose “Manager”, then choose “Disk Manager” of the list ·The operating interface will show on the computer, Subarea Format following the operating interface.
  • Page 8 A: USB 3.0 host adapter works in the same way as the built-in USB ports. Visit www.cineraid.com for more detail information if needed. For tech support, mail to support@cineraid.com. CineRAID Tekram USA, Inc. 14228 Albers Way, Chino, CA 91710 USA...

Table of Contents