Troubleshooting 7 Blinks Failure (Tc-P50St50) - Panasonic TC-P50ST50 Troubleshooting Manual

Troubleshooting 7 Blinks Failure (TC-P50ST50)

Blink List of boards likely to cause this symptom.
Code
No.1 No.2 No.3
7 SU SC SS
Blinks SD
Unplug the TV and reconnect SS11.
Remove SC20 from the SC board.
Plug-in the TV and turn it on.
8 Times
Unplug the TV. Reconnect SC20
and follow step #1 of the next slide.
No.4 No. 5 No. 6
A Panel
Check the wires between connector P2 on the P board and
SC2 on the SC board. Make sure they are properly seated. If
the problem persists, unplug the TV and remove connector
SS11 from the SS board. Plug-in the TV and turn it on.
7 Times
Continue on the page after next
Find information for TC-P50UT50 on slides 23~26
Start Here
Is the power
LED blinking 7
or 8 times?
Is the power
LED blinking 7
or 8 times?
Replace the SS
8 Times
board
Replace the A
7 Times
board
Slide 19