Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Elite TH0471
Summary of Contents for Elite TH0471
- Page 1 Elite TH0471 Digital 7-Day Programmer with Temperature Control Instruction Manual...
- Page 2 Elite TH0471 Programmer with Temperature Control INTRODUCTION The TH0471 central heating programmer can automatically switch your central heating and hot water ON and OFF independently three times a day at whatever times you choose. During the installation the installer will select either 24 hour or...
- Page 3 The built in programme, (the same for both central heating and hot water), is loaded by pressing the button, (using a non- metallic pointed tool), and is as follows: The TH0471 allows five options for both the CH and HW programme period: • OFF - off all the time •...
- Page 4 Elite TH0471 Programmer with Temperature Control SETTING TIME AND DAY Move the slider switch to , the “SET” icon will appear and be flashing. Press the . button to select the current day of the week. Press the buttons to adjust the time. The time will change faster if the button is held down continuously.
- Page 5 Elite TH0471 Programmer with Temperature Control CHANGING PROGRAMME TIMES Central Heating and Hot Water can have independent programmes which can easily be changed to suit your lifestyle. To change the Central Heating programme: • move the slider switch to “PROG SET”...
- Page 6 Elite TH0471 Programmer with Temperature Control If the unit is installed as a 7-day programmer the initial programme displayed will be for Monday in Central Heating. Any day of the week may be reached by pressing the button repeatedly. The ON/OFF times can be changed for each day as described previously.
- Page 7 Elite TH0471 Programmer with Temperature Control USING ADVANCE This function is only applicable when your programmer is set with at least 1 ON/OFF period. The normal switching times can be temporarily overridden by pushing the button marked ADVANCE. This switches ON to OFF or OFF to ON as required, but the normal programme switching times will not be permanently affected.
- Page 8 Elite TH0471 Programmer with Temperature Control ° FROST PROTECTION OPTION ° There is a frost protection jumper switch marked “5 C” on the back of the unit. This will switch the unit on automatically, in OFF, while the unit is in the OFF position, if the room °C.
- Page 9 Elite TH0471 Programmer with Temperature Control BACK LIGHT OPTION The programmer has a back light to illuminate the display. There are two available settings, “AUTO” or “ON”. The “AUTO” setting leaves the back light on for 30 seconds after any button as been pushed.
- Page 10 Elite TH0471 Programmer with Temperature Control...
Need help?
Do you have a question about the TH0471 and is the answer not in the manual?
Questions and answers