Simplink Connection; Activating And Using The Simplink Menus - LG 50LN5100 Owner's Manual

SIMPLINK connection

Use the TV remote control to play and control the
AV device connected with the HDMI cable through
HDMI-CEC. Your TV only works with the devices
that support HDMI-CEC. But only devices with the
logo are supported.
Connect one end of the HDMI cable to the HDMI
IN terminal on the rear of the TV and the other end
to the SIMPLINK device.
NOTE
If the connected device does not support
y
HDMI-CEC, the SIMPLINK feature is
unavailable.
To operate SIMPLINK, you should use a
y
High Speed HDMI cable that supports CEC
(Consumer Electronics Control) function.
SIMPLINK may not work properly if you a
y
third-party device that has an HDMI-CEC
function.
Activating and Using the
SIMPLINK menus
1
Press SIMPLINK to access the SIMPLINK
menus.
2
Press the Navigation buttons to scroll to one of
the devices and press OK.
TV
DISC
HD Player
VCR
HD HT 1
ꔃ
HDD Recorder
Speaker
TV Speaker
ꔗ
ꔀ Move ꔁ Change Device ꔉ Select
No. Description
1 Displays the previously viewed TV channel.
Plays discs. When multiple discs are available,
2 the title of the disc appears at the bottom of the
screen.
3 Controls the connected VCR.
HDD recordings playback: Controls the recording
4
stored in HDD.
Changes the audio output between Home theater
speaker and TV speaker for the connected HTS
5
only.
1
2
ꔃ
3
4
5
ꔃ
MAKING CONNECTIONS
- A check mark appears in front of the selected
device.
- Available devices display in a bright color.
- Unavailable devices display in grey.
3
Control the selected AV device.
- Direct Play: After connecting AV devices to
the TV, you can directly control the devices
and play media without additional settings.
- Select AV device: Enables you to select one
of the AV devices connected to the TV.
- Disc playback: Control connected AV devices
by pressing the Navigation buttons, OK, ,
, and .
- Power off all devices: When you power off
the TV, all connected devices are turned off.
- Switch audio-out: Offers an easy way to
switch audio-out. (HTS only)
- Sync Power on: When the equipment with
SIMPLINK function connected HDMI terminal
starts to play, The TV will automatically turn
on.
NOTE
If you change the input source by pressing
y
INPUT, the progressing function of the
SIMPLINK device will stop.
If you select a device that has the
y
home theater feature, the sound output
automatically switches to the home theater
speaker and the TV speaker turns off.
If a connected SIMPLINK home theater
y
system does not play the audio from the TV,
connect the DIGITAL AUDIO OUT terminal
on the rear of the TV to the DIGITAL AUDIO
IN terminal on the back of the SIMPLINK
device with an optical cable. (For LN5100,
LN5200, LN530B, LN5300, LN5310,
LN5400 series)
55
,