Left Side
RS-485/RS-422
RS-232
Serial I/O Port of RS-232/RS-422/RS-485
Connect the serial data cable between the Wi-Fi converter and the serial
device. Follow the parameter setup procedures to configure the converter
(see the following chapters ).
Rear Side
Reset Button
Terminator
Reset Button
If by any chance, you forget the setup password, or have incorrect settings
making e-Net TCP/IP converter inoperable. First, turn on the power and wait
the sys led light . Second, use any point tip to push this button and hold it and
wait for 3 second. All the parameters will be reset to the factory default
( default ip: 192.168.10.2).
13