Table of Contents
Advertisement
Message
KPDL Error
Press GO
Load Cassette #
(paper size)/(paper
type)
Load MP tray
(paper size)/(paper
type)
Memory card err
Insert again
MemoryCard err##
Press GO
Memory overflow
Press GO
Missing
duplex unit
Missing
stapler unit
KPDL (PostScript) error has occurred.
##
Press the GO key to resume printing. Or,
you can abandon printing by the CANCEL
key.
The paper cassette (indicated by #)
matching the paper size and paper type of
the current job is empty. Load paper into
the paper cassette. Press the GO key to
resume printing.
There is no paper cassette installed in the
printer that matches the paper size and
paper type of the current job. Set alterna-
tive paper in the MP tray. Press the GO
key to resume printing.
The memory card is accidentally removed
from the memory card slot during reading.
If you continue reading the memory card,
insert the same memory card into the slot
again. The printer again reads it from the
beginning of the data. Also see Insert
the same memory card on page 6.
A memory card error has occurred. Press
the GO key to resume.
The total amount of data received by the
printer exceeds the printer memory. Try
adding more memory. Press the GO key
to resume printing.
You have attempted to duplex-print while
the duplexer is not installed. Install the
duplex unit.
The stapler unit is not installed in the
option document finisher. Install the
stapler unit.
Corrective Action
7
Advertisement
Table of Contents
