Remote Control; Battery Insertion - NAD D 3020 Owner's Manual

1
3
BATTERY INSERTION PROCEDURE
1 Insert a hooked tip into the battery door release hole.
2 Slide out the battery tray.
IDENTIFICATION OF CONTROLS

REMOTE CONTROL

1 ON: Switch D3020 from Standby mode to operating mode.
2
2 OFF: Switch D3020 to standby mode.
5
3 +/- : Increase or decrease audio level. Release mute function.
6
4 t u : Select source.
4
5 uj : Temporarily mutes audio output or restores audio from mute
mode.
6 TUNER CONTROLS (Not applicable for D 3020; Applicable for NAD
products with Tuner section)
9 0: Step up or down Presets.
u j : Select through applicable Tuner bands.
3 Place the supplied CR2025 battery into the tray. Ensure the "+" symbol is
facing upwards.
4 Slide the tray back until it clicks into place.
7