Sony MDR-ZX300 Operating Instructions

Stereo
Headphones
MDR-ZX300
MDR-ZX100
©2010 Sony Corporation Printed in Thailand


English
Stereo headphones
How to use (see fig. )
These headphones are for use with a stereo mini jack.
Extend the slider to adjust the length.
Wear the headphone marked  on your right ear, and the one marked  on your left ear.
There is a tactile dot on the unit marked  to distinguish the left side.
How to confirm the model name (see fig. )
The location of the model name, ("MDR-ZX300" or "MDR-ZX100") is shown in the
illustration. If you have a question about the product, check the model name beforehand
to let us know your model.
Note
When checking the model name, do not move the headphone beyond its normal range.
4-193-859-11(2)
Operating Instructions
使用說明書
Tactile dot
Precautions
 Listening with headphones at high volume may affect your hearing. For traffic safety,
do not use while driving or cycling.
 Do not subject the headphones to excessive shock.
 Handle the driver units carefully.
 Do not put weight or pressure on the headphones as it may cause the headphones to
deform during long storage.
 The earpads may deteriorate due to long-term storage or use.
 Do not leave the jack plug dirty otherwise the sound may be distorted.
 Clean the headphones with a soft dry cloth. Do not blow on the units when cleaning.
Do not allow the plug to become dirty, otherwise the sound may deteriorate.
 Do not leave the stereo headphones in a location subject to direct sunlight, heat or
moisture.
Optional replacement earpads can be ordered from your nearest Sony dealer.
MDR-ZX300
Features
 Neodymium magnet delivers powerful sound.
 Slim, folding design for easy portability.
 Resists high power input up to 1,000 mW.

Specifications

Type : Closed, dynamic (supra-aural) / Driver unit : 30 mm, dome type (CCAW Voice
Coil) / Power handling capacity : 1,000 mW (IEC*) / Impedance : 24 Ω at 1 kHz /
Sensitivity : 102 dB/mW / Frequency response : 10 – 24,000 Hz / Cord : 1.2 m (47 1/4 in),
Y type / Plug : Gold-plated L-shaped stereo mini plug / Mass : Approx. 120 g (4.23 oz)
without cord / Supplied accessory : Operating Instructions (1)
* IEC = International Electrotechnical Commission
Design and specifications are subject to change without notice.
MDR-ZX100
Features
 30 mm driver unit for clear sound.
 Slim, folding design for easy portability.
 Resists high power input up to 1,000 mW.
Specifications
Type : Closed, dynamic (supra-aural) / Driver unit : 30 mm, dome type (CCAW Voice
Coil) / Power handling capacity : 1,000 mW (IEC*) / Impedance : 24 Ω at 1 kHz /
Sensitivity : 100 dB/mW / Frequency response : 12 – 22,000 Hz / Cord : 1.2 m (47 1/4 in),
Y type / Plug : Gold-plated L-shaped stereo mini plug / Mass : Approx. 120 g (4.23 oz)
without cord / Supplied accessory : Operating Instructions (1)
* IEC = International Electrotechnical Commission
Design and specifications are subject to change without notice.
This mark is valid only in those European countries where it is legally
applicable.