Variquest Design Center 1000 Unpacking And Setup Instructions

VariQuest™ Design Center 1000 (DC1000) Unpacking and Setup Instructions
Step 1: unpack the box and check the contents.
The DC1000 and its
accessories are packed in a
cardboard carton with foam
padding for protection
during shipment. Carefully
unpack the system and keep
the packing materials for
future use.
Verify that all of the items
shown below are included in
the box. If an item is missing
or appears to be damaged,
contact your VariQuest
Dealer immediately.
Documentation:
• DC1000 User's Guide
Power Cable Windows OS
CD-ROM
VariQuest Design Center 1000
(continued on other side)
Step 2: remove the rear cover.
A. Rotate the display until it is
perpendicular.
B. Open the rear cover latches.
C. Remove the rear cover.