Summary of Contents for ARRO-GUN BULLET B007
- Page 1 ARRO-GUN SPRAY SYSTEMS BULLET Powered by MODEL B007 OWNER'S MANUAL AG-0025 ©2008 ARRO-GUN SPRAY SYSTEMS...
- Page 2 TABLE OF CONTENTS PAGE SAFETY FUELING KNOW YOUR UNIT SERVICING STARTING OPERATION MAINTENANCE...
- Page 3 SAFETY READ ALL INSTRUCTIONS BEFORE OPERATING Read the instructions carefully. Be familiar with all controls before operating. Do not operate this unit when tired, ill, or under the influence of drugs or medica- tion. Inspect the unit before use for loose or broken parts. Check for fuel leaks. Do not ...
-
Page 4: Know Your Unit
KNOW YOUR UNIT Ignition Switch Throttle Lock Throttle Chemical Tank Fill Cap Chemical On-Off Valve Choke Lever Fuel Primer Bulb Oil Fill Cap & Level Indicator Fuel 10W30 Oil Fill Cap 2.7 Oz (80 ml) UNLEADED GASOLINE ONLY... - Page 5 SERVICING CHEMICAL To fill with chemical, remove the filler cap. Make sure the chemical valve is in the “off” position. Carefully pour chemi- cal to the bottom of the filler neck. Replace filler cap and tighten . NEVER REMOVE THE CHEMICAL FILLER CAP Fill WHILE THE UNIT IS OPERATING.
- Page 6 STARTING Place the unit on firm, level ground. Set the ignition switch to the “I” position (fully back). Prime the unit with fuel by depressing the primer bulb lo- cated at bottom of the carburetor approximately 10X. Set the choke lever to the “UP” (closed) position. Grasp the start handle.
Need help?
Do you have a question about the BULLET B007 and is the answer not in the manual?
Questions and answers