Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for MicrohDJ nitro quad
Summary of Contents for MicrohDJ nitro quad
-
Page 2: Introduction And Unpacking
Please install and operate the fixture according to instructions. Meanwhile, please keep this manual for future reference. The MICROH NITRO QUAD effect fixture is made of a new type of high temperature cast aluminum casing. The fixture is designed and manufactured strictly following CE standards, complying with international standard DMX512 protocol. -
Page 3: Mounting And Installation
Regardless of the rigging option you choose for your MICROH NITRO QUAD effect fixture, always be sure to secure your fixture with a safety cable. The fixture provides a built-in rigging point for a safety cable on the hanging bracket as illustrated above. -
Page 4: Setup Menu
5. DMX-512 CONTROL CONNECTIONS This fixture complies with international USITT DMX standards and can be used with either a 3 pin or 5 pin DMX connector. Plug in the provided 3 pin XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-pin XLR input of the LED COB100 PAR/RGBWA. -
Page 5: Channel Function
185 - 255 FADE SPEED 0 - 254 SPEED SOUND ACTIVE 9. TECHNICAL SPECIFICATIONS MODEL: NITRO QUAD 2 x 9W RGB, 2 x 3W white LED’s LAMP: OPERATING TEMPERATURE: -25°C to 45°C VOLTAGE: 120V 60Hz 132W FUSE: 2A DIMENSIONS: 190(H) x310(W) x340(L) mm... - Page 6 10. MAINTENANCE AND CLEANING The following points have to be considered during the inspection: 1) All screws for installing the device or parts of the device must be tightly connected, and must not be corroded. 2) There must not be any deformations on the housing, colour lenses, fixations or installation spots (ceiling, suspension, trussing).