Xtreamer Prodigy 4K User Manual page 15

Pair Prodigy 4K Remote control to your TV
Xtreamer Prodigy 4K remote control can replace your TV or Cable SetopBox remote with a simple
pairing steps. Here's how you can pair the remote to your TV:
1. Place your TV remote control or whatever else remote you want to pair with your xtreamer next
to your Prodigy 4K remote control – Make sure that IR sensors are facing one another.
2. At the top of the Xtreamer remote control you will see several keys. Press and hold the POWER
button in the "TV control" section for about 5 seconds until the red LED starts flashing fast.
3. Now its time to designate a key on the Xtreamer remote to learn the function
of the TV/Cable box remote. To do that click on a key in the "TV control" section
that you want to pair with a TV remote's button – red LED will start blinking slowly.
4. Click on a button on your TV remote control that you want to pair. We recommend pairing the
ON/Off and Volume keys.
5. If the pairing is successful the LED will blink 3 times.
6. Repeat the steps above for each key.
| Xtreamer Prodigy 4K user guide
15