Table of Contents
Advertisement
Detail number
Standard set-
ting (0)
Function number
Superimpose
On
when focused
Auto return on
Rewind auto return
Leave film tip
Film tip not left
when rewinding
Selection of aper-
Aperture
ture stop-down
stopped down
button operation
while pressed
Focus button
SAF
function in "MF"
mode
Red-eye reduc-
Off
tion with internal
flash
Exposure com-
F dial
pensation setting
(with Av, P)
Exposure value
Align aperture
display when zoom
ring
lens is fitted (*)
Until power
Continued exposure
supply OFF
compensation
Exposure com-
pensation setting
F dial
CLE: Resetting cus-
The custom functions ( ~ ) are always set to the standard settings.
tom functions
• Note that if the exposure mode selector lever is set to any posi-
tion other than "CF" at this time, all the custom functions are
reset to the standard settings (i.e. to "0").
* When using lenses for which the open aperture value (brightness) with zooming varies
(eg. Vario Sonnar 28-80mm F3.5-5.6), the actual aperture is controlled by the camera so
that it assumes the value set with the aperture ring, rather than being controlled by zoom-
ing. Set Custom Function
to (1) to vary the aperture with zooming.
88
Changed set-
Changed set-
Changed set-
ting (1)
ting (2)
ting (3)
Off
Auto return off
Film tip left
Aperture switches
between stopped
down and open
each time button
is pressed
CAF
On
F dial and
R dial
Link to zooming
Until setting
cancelled
Set with F dial
while pressing
LIGHT button
2. Setting custom functions
Display panel
Detail
Function num-
Detail number
ber
Custom function setting mode
Function number
Detail number
Set the position dial to "CF".
The display panel is as shown at left
(custom function setting mode).
Turn the R dial to select
"Function number".
Turn the F dial to select "Detail
number".
Set the position dial to a position
other than "CF".
The custom function is set.
Return the dial to "
" (white) or "
(green) and take the photograph.
The display panel returns to the normal
display.
• To initialize all set functions, display
"CLE" as previously described in 2,
and set to a position other than "CF".
"
89
Advertisement
Table of Contents
