Table of Contents
Advertisement
Spark Plugs (6-cylinder Models)
4. Use a wrench to remove the
hexagon socket head cap bolt
holding the ignition coil. Remove
the ignition coil by pulling it
straight out.
Maintenance
5. Remove the spark plug with
a five-eighths inch (16 mm) spark
plug socket.
6. Put the new spark plug into the
socket; then screw it into the hole.
Screw it in by hand so you do not
crossthread it.
7. Torque the spark plug. (If you do
not have a torque wrench, tighten
the spark plug two-thirds of a turn
after it contacts the cylinder head.)
Tightening torque:
13 lbf.ft (18 N . m,1.8 kgf.m)
Advertisement
Table of Contents
