Connecting Bluetooth - Chevrolet Spark Owner's Manual

(8) fSEEKe buttons
■ Press these buttons in Bluetooth
audio play mode to play the
previous or next track.
■ Hold down these buttons to rewind
or fast forward, and release to play
at normal speed.
(16) PHONE [y] / MUTE [@]
■ Press this button to activate
Bluetooth mode.
■ Hold down the button to turn the
mute function on or off.

Connecting Bluetooth

Registering the Bluetooth device
Register the Bluetooth device to be
connected to the Infotainment
system.
Firstly, set up the Bluetooth device to
be connected from the Bluetooth
settings menu to enable other
devices to search for the Bluetooth
device.
Press the CONFIG button, and use
the MENU button with TUNE dial to
move to Settings → Bluetooth settings
→ Bluetooth → Add device, and then
press the MENU button.
■ Bluetooth devices can be
registered not only by using the
CONFIG button, but also by using
Phone menu → Bluetooth settings →
Bluetooth → Add Device.
Infotainment system
■ If there already is a Bluetooth
device connected to the
Infotainment system, the Bluetooth
is busy message will appear.
■ Connection standby will be
displayed with a message and a
security code. (The initial value is
0000, and can be changed from
Settings → Bluetooth settings →
Bluetooth → Change Bluetooth
code.)
The Infotainment system can be
found by searching the to-be-
connected Bluetooth device.
Enter the security code for the
Infotainment system through the
Bluetooth device.
125