Table of Contents
Advertisement
Quick Links
Congratulations
Congratulations on the purchase of your new advanced Bullard T4
Thermal Imager.
The new Bullard T4 combines advanced thermal imaging
technology with our expertise in high heat, impact resistant
engineered polymers to bring you the most durable thermal
imager on the market. The T4's innovative, compact design and
logical, easy-to-use interface presents a truly personalized
thermal imaging tool to today's firefighters.
The benefits of using thermal imaging technology as a
firefighting tool encompass nearly every aspect of a firefighter's
job. Thermal imaging is not, however, a technology designed to
replace current firefighting tactics. Rather, it is a tool that allows
the firefighter to be more effective and make better decisions.
Some of the many uses for your Bullard T4 Thermal Imager
include:
• Search and rescue
• Scene assessment
• Locating the seat of the fire
• Determining the spread of the fire
• Locating hot spots
• Identifying potential flashover situations
• Determining ventilation points
• Determining entry and exit points
• Overhaul
• Hazmat
• Wildland firefighting
• Incident investigation
• Training
NOTE
To ensure that we are able to reach you with any product
or software updates, please fill out the warranty card
enclosed with your Bullard T4 Thermal Imager.
WARNING
Read all instructions and warnings before using this product.
Your thermal imager is like any other tool. It must be used
properly and safely. All users should be trained on the proper
and safe use of thermal imaging prior to using the T4 Thermal
Imager. This is especially important for users who may use the
T4 Thermal Imager in hazardous or IDLH (immediately
dangerous to life and health) environments.
Failure to follow this information could result in death or
serious injury.
Bullard T4
Lens Bezel
Lens
Battery
Bullard T4 Thermal Imager
User Manual
Thermal Throttle
Rear Boot
LCD Screen
Side Strap
Figure 1
Zoom Button
Power Button
Advertisement
Table of Contents
Summary of Contents for Bullard T4
-
Page 1: User Manual
Your thermal imager is like any other tool. It must be used properly and safely. All users should be trained on the proper and safe use of thermal imaging prior to using the T4 Thermal Imager. This is especially important for users who may use the T4 Thermal Imager in hazardous or IDLH (immediately dangerous to life and health) environments. - Page 2 To activate the Thermal Throttle option, NOTE locate the two black buttons on the top of the T4 (Figure 1). Press the down Fully charged NiMH batteries will provide a run time of more than button (the button closer to the front of the imager) to activate the Thermal three hours.
- Page 3 The T4 thermal imager is extremely sensitive to intense, radiant heat sources. Never point the T4 at the sun or any other source of extreme radiant heat, as this could could permanently mar the surface or degrade the protective properties of the casing.
-
Page 4: Ordering Information
(1) year from date of 3. When the outer shell is obsolete and Bullard no longer stocks the part, the limited lifetime manufacture. Bullard' s obligation under this warranty is limited to repairing or replacing, at warranty will be terminated.
Need help?
Do you have a question about the T4 and is the answer not in the manual?
Questions and answers