Nielsen-Kellerman Kestrel 4000 Instruction Manual

Kestrel
Pocket Weather
Kestrel ® 4000 Pocket Weather
BACK
IMPELLER
Sapphire jewel bearings
on a user-replaceable
impeller.
IMPELLER COVER
Swivel cover protects
impeller when not in use.
DATA UPLOAD OPTICAL COUPLER
Software and serial port
interface sold separately.
BATTERY DOOR
Sealed with o-ring to keep
product watertight.
® 4000
Tracker
™
Instruction Manual
NK
™ Tracker ™
TEMPERATURE SENSOR
Hermetically sealed
precision thermistor.
HUMIDITY SENSOR
Capacitive sensor.
SERIAL NUMBER
PRESSURE SENSOR
Monolithic silicon
piezoresistive sensor.
2 AAA BATTERIES
Kestrel
™
MANUAL MEMORY BUTTON
Press to manually store current
conditions to memory.
MEASUREMENT BUTTONS
Press to scroll between screens:
Date/Time, Measurements,
User Defined Screens
POWER/SETUP BUTTON
Hold to turn power on or off. Press
to enter and exit Main Setup Menu.
Congratulations on the purchase of your Kestrel 4000 Pocket Weather Tracker! The Kestrel 4000 is
the next generation of weather monitoring. Now, you can instantly measure EVERY major
environmental condition easily, accurately, and right in the palm of your hand.
While the Kestrel 4000 is user-friendly and simple to use, (and the Quick Start Card will help get you
started) reading the instruction manual is recommended in order to use the Kestrel 4000 to its fullest
potential.
NK, manufacturer of Kestrel Pocket Weather Meters, is available to answer questions and provide
support. Contact NK by phone: 610.447.1555, fax: 610.447.1577, email: info@nkhome.com, or web:
www.nkhome.com.

Getting Started

Pouch And Lanyards
Battery Installation
On/Off
Date and Time Set Up

Screen Navigation

Measurements And Modes
Charts
Special Functions
User Screens
Wind Speed/Chill Averaging
Baometer/Altimeter Adjustments
Manual Data Storage
Backlight
Main Setup Menu
Glossary
Factory Default Settings
Specifications
3
® 4000 Pocket Weather ™ Tracker
FRONT
5
5
5
5
6-7
7
8
8
8
9
9
9-11
12-13
14
15
™
BACKLIGHT BUTTON
Press to activate
backlight
for 1 minute.
MODE BUTTONS
Press to change mode of
measurements: Current,
Min/Max/Avg, Chart.
COMMAND BUTTON
In Chart Screens, press
to view data points.
In Setup Menus, press
to make selection.
2
4