Table of Contents
Advertisement
Cautions：
1.
Make sure the power supply voltage is correct before using the camera.
2.
Do not drop the camera or subject it to physical shock.
3.
Do not touch CCD (Charge Coupled Device) modules with fingers. If cleaning is necessary, use clean cloth
with a bit of ethanol and wipe it gently. If the camera will not be used for an extended period, please turn on
the lens cap to protect the CCD from dirt.
4.
Do not aim the camera at the sun or extra bright places. A blooming or smear may occur otherwise (which is
not a malfunction however), and affecting the endurance of CCD at the same time.
5.
The CCD may be burned out by a laser beam, so when any laser equipment is on using, make sure that the
surface of CCD will not be exposed to the laser beam.
6.
Do not place the camera in extremely hot, cold(the operating temperature shall be－20℃～＋60℃ ), dusty
or damp locations, and do not expose it to high electromagnetism radiation.
7.
To avoid heat accumulation, good ventilation is required for operating environment.
8.
Keep the camera away from liquid while on using.
9.
While on a delivery, the camera shall be packed in its original packing, or packing of the same texture.
10.
Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment shall be replaced
regularly according to their average enduring time. The average time varies because of differences between
operating environment and using history, so regular checking is recommended for all the users. Please
contact with your dealer for more details.
4
Hide quick links:
Advertisement
Table of Contents
