Advertisement
S
afety Information
WARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
This symbol, wherever it appears, alerts you to the presence of
uninsulated dangerous voltage inside the enclosure-voltage that
may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important
operating and maintenance instructions in the accompanying
literature. Please read the manual.
CAUTION:
1. Avoid Excessive Heat, Humidity, dust and vibration.
2. Avoid Physical Shocks.
3. Do Not Open The Case Or Attempt Repairs Or Modifications Yourself.
4. Clean Wit A Soft Dry Cloth.
h
5. Always Use The Correct Power supply.
6. The Product Should Be Serviced By Qualified Service Personnel.
INPUT:
Connectors:
XLR
Type: Electronically balanced/unbalanced, Therefore filtered
Impedance:
balanced >50K Ohms; unbalanced >25K Ohms
Max Input Level: +22dBu, balanced or unbalanced
CMRR:
>40dB, typically >55dBu at 1KHz
OUTPUT:
Connectors:
XLR
Type: Electronically balanced/unbalanced, Therefore filtered
Impedance:
balanced 200 Ohms; unbalanced 100 Ohms
Max Output Level: +22dBu, balanced or unbalanced
PERFORMANCE:
Bandwidth:
20Hz to 20KHz,+0/-0.5 dB
Frequency Response:
<3Hz to >90KHz, +0/-3dB
Signal-to-Noise:
Ref, +4dBu, 22KHz measurement band wisth
Stereo Mode : Low Output >94dB; Mid Output >93;
High Output >91dB
Mono Mode :
Low Output >94dB;
Low-Mid Output >94dB;
High-Mid Output >92dB;
High Output >88dB
Dynamic Range: >106dB, unweighted, any output
THD + Noise: <0.004% at +4dBu, 1KHz
Inter channel Crosstalk: <-80dB, 20Hz to 20KHz
CROSSOVER FREQUENCIES:
Stereo Mode:
Low/High: 45 to 96Hz or 450Hz to 9.6KHz(x10 setting)
Low/Mid:
45 to 960Hz or 450Hz to 9.6KHz(x10 setting)
Mid/High:
45 to960Hz or 450Hz to9.6KHz(x10setting)
Mono Mode:
Low/Low-Mid:
45 to 960Hz or 450Hz to 9.6KHz(x10 setting)
Low- Mid/High-Mid:
45 to 960Hz or 450Hz to 9.6KHz(x10 setting)
High-Mid/High:
45 to 960Hz or 450Hz to 9.6KHz(x10 setting)
Filter Type:
linkwitz-Riley, 24dB/octave, state-variable
FUNCTION SWITCHES:
Front Panel:
Low Cut:
activates 40Hz Butter worth, 12 dB/octave high-pass filter, one
switch per channel
Phase Invert:
Inverts the phase at the out, one switch per output
Rear Panel:
x10:
Multiplies crossover frequency range by 10, one switch per channe
Mode:
Selects stereo/mono and 2/3-way operation
LF SUM: Selects normal(strso) or mono- summed low frequency operation
Power Supply
Operating Voltage:
110VAC 50/60Hz, 220VAC 50/60Hz
Mains Connection:
IEC receptacle
Size & Weight
Size:
482mm(W) x 150mm(D) x 45mm(H)
Weight:
3Kg
S
pecifications
Advertisement
