Panasonic CU-8ME1XPA Operation Manual

Packaged air conditioner urban multi heat recovery inverter series

Advertisement

Quick Links

OPERATION MANUAL

PACKAGED AIR CONDITIONER
Model No.
(Urban Multi Heat recovery inverter series)
CU-8ME1XPA
CU-10ME1XPA
Before operating this set, please read these instructions completely

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic CU-8ME1XPA

  • Page 1: Operation Manual

    OPERATION MANUAL PACKAGED AIR CONDITIONER Model No. (Urban Multi Heat recovery inverter series) CU-8ME1XPA CU-10ME1XPA Before operating this set, please read these instructions completely...
  • Page 2: What To Do Before Operation

    If your installation has a customized control system, ask your Display (inspection/test operation) Panasonic dealer for the operation that corresponds to your When the inspection/test operation button is pressed, the system. display shows the mode in which the system actually is.
  • Page 3: Operation Range

    Ask a qualified service person to perform this work. • To prevent refrigerant leak, contact your Panasonic dealer. When the system is installed and run in a small room, it is required to keep the concentration of the refrigerant, if by and chance coming out, bellow the limit.
  • Page 4 FOR SYSTEMS WITHOUT COOL/HEAT CHANGEOVER REMOTE CONTROL EXPLANATION OF HEATING OPERATION SWITCH (see figure 4) Defrost operation (heatpump types only) Press the operation mode selector button several times and • In heating operation, freezing of the outdoor unit coil select the operation mode of your choice; increases.
  • Page 5 1 hour. Note Press the timer on/off button. • Contact your Panasonic dealer in case of changing the The timer setting procedure ends. The display combination or setting of group control and two remote controller control systems.
  • Page 6: Optimum Operation

    Ask your THE INSIDE OF AN OUTDOOR UNIT IS WARM EVEN Panasonic dealer for details on cleaning the unit. This operation WHEN THE UNIT HAS STOPPED requires a qualified service person.
  • Page 7: Troubleshooting

    2 Indoor unit number in which a malfunction occurs 3 operation lamp 4 Malfunction code Measure: Notify your Panasonic dealer and report the malfunction code. If the system does not properly operate except for the above mentioned cases and none of the above mentioned malfunctions is evident, investigate the system according to the following procedures.
  • Page 8 Matsushita Electric Industrial Co., Ltd. Web Site : http://www.panasonic.co.jp/global/ 3VA11387-2A EM01A146 (0110) HT...

This manual is also suitable for:

Cu-10me1xpa

Table of Contents