Gira 2352 02 Operating Instructions

Operating Instructions
LAN adapter
2352 02
Gira
Giersiepen GmbH & Co. KG
Electrical Installation
Systems
P.O. Box 1220
42461 Radevormwald
Phone +49 (0) 2195 / 602 - 0
Fax +49 (0) 2195 / 602 - 339
www.gira.com
info@gira.com
Safety instructions
Only load the device up to the specified power
limit.
Devices in plug-socket outlet housings must not
be switched consecutively.
Only operate device indoors and avoid influence
of humidity, dust, sun and heat.
Note on compliance with ErP directive: The
device cannot be set to off or standby condition
as this is not compliant with its intended use.
Proper use
The LAN adapter is for transmission of weather
data from the internet to the Gira energy and
weather display.
Uses other than those specified in these operat-
ing instructions are not in accordance with the
intended purpose and lead to exclusion of war-
ranty and liability. This is also the case with mod-
ifications and conversions.
Functional description
The LAN adapter is the unit of connection
between the internet and the Gira energy and
weather display.
The LAN adapter queries a weather forecast
from the internet portal of a professional pro-
vider and transmits this via radio to the energy
and weather display. The system time is also
transmitted. The LAN adapter can be configured
with the help of PC software.
The LAN adapter has two channels that can be
assigned to any number of energy and weather
displays.
Channel 1 is assigned via channel button 1. The
weather forecast for channel 1 is designated in
the energy and weather display with "Home".
Channel 2 is assigned via channel button 2. The
weather forecast for channel 2 can be shown on
an additional energy and weather display.
Web
Channel 1
. . .
Location channel 1 Location channel 2
(Home)
Start-up
The LAN adapter is supplied with voltage via the
230 V mains supply.
1. Insert the LAN adapter into a socket outlet.
2. Connect the LAN adapter to a network with
the included network cable.
The network must have a connection to the
internet.
✓
Both LEDs light up for approx. 5 seconds
With the plug-socket outlet housing it is also
possible to use the socket outlet for any con-
sumers to 16 A.
Assigning the LAN adapter
Modifying the setting at the energy
i
and weather display for channel 2.
If channel 2 is to be assigned to the energy and
weather display, "LAN 2" must be selected in the
configuration menu of the energy and weather
display.
1. Press and hold the required channel button of
the LAN adapter for 3 seconds.
✓
The LAN adapter now transmits an assign-
ment signal every five seconds for the next
five minutes. The corresponding channel LED
lights up for the duration of the assignment
procedure.
2. Trigger the assignment mode on the energy
and weather display within these five minutes
(see operating instructions for the energy and
weather display).
✓
Following successful assignment the energy
and weather display then displays the corre-
sponding weather data.
3. Pressing the channel button again exits the
programming mode of the LAN adapter.
The LAN adapter can be assigned to any number
of energy and weather displays.
LAN
Channel 2
Deleting the assignment
Deleting the LAN adapter assignment is only
possible at the energy and weather display.
. . .
Installing the software
System requirements:
• Operating system: Windows XP,
Windows Vista, Windows 7
• Network connection
• Internet access
Installation:
1. Insert the included CD.
✓
The CD starts automatically.
2. Follow the installation instructions.
Configuration
1. Start the software
2. With several LAN adapters:
Select the LAN adapter to be configured in
the first window and click on "Select".
If only one LAN adapter is in the network,
selection is omitted and the PC automatically
locates the available LAN adapter.
LED (concealed)
Channel 2
Channel 1
Channel button 2
Channel button 1