Setting The Date And Time - Minolta Dimage F200 Instruction Manual

Setting the date and time

After initially inserting a memory card and battery, the camera's clock and calendar must
be set. When images are recorded, the image data is saved with the date and time of
recording. Depending on the region, the menu language may also have to be set. To
change the language, see the camera notes on the following page.
Turn the mode dial on the top of the camera to the setup position. The
camera will turn on and the setup menu will be displayed.
Navigating the menu is simple. The up/down and left/right keys of the
controller (1) move the cursor and change settings on the menu.
The central button of the controller selects menu options and sets
adjustments.
Basic Custom1 Custom2
LCDbrightness –
Format –
Power save 1 min.
Language English
20
G
ETTING UP AND RUNNING
Reset default
Noise reductn On
Date/Time set
Video output
Setup menu: custom 2 section
Controller
For customers in certain areas, the menu language must also be set. Highlight the lan-
guage option in the basic section of the setup menu. Press the right key to display the lan-
guage settings. Using the up/down keys, highlight the desired language. Press the central
button to set the highlighted language; the setup menu will be displayed in the selected lan-
guage.
Basic Custom1 Custom2
–
–
Date format YYYY/MM/DD
NTSC
Use the left and right keys to select the item to
be changed.
Use the up and down keys to adjust the item.
Press the central button to set the clock and
calendar. The setup menu will be displayed.
Camera notes
Use the right key to highlight the
custom 2 tab at the top of the menu.
Use the down key to highlight the
date/time-set menu option.
Press the right key. "Enter" will appear
on the right side of the menu.
Press the central button to display the
date/time setting screen.
Date/Time set
:enter
Date/Time setting screen
21