Contents Page Warranty About your Warranty Safety Information Specification Identification Installation Operation Maintenance Trouble Shooting Notes PUMP DETAILS Record the details of your pump and the supplying Silvan dealer here for future reference when discussing service, ordering parts or making a warranty claim. PUMP MODEL NO.
New Product Warranty the Silvan Warranty This warranty is the only warranty applicable to Silvan new products ('Products') and, to the maximum extent permitted by law, is expressly in lieu of any other conditions or warranties expressed or implied in relation to the Products. Subject only to legislative obligations to the contrary, Silvan shall not be liable for incidental or consequential damage resulting from ownership or use of a Product.
About your Warranty Silvan Australia Pty. Ltd. builds equipment to a high level of specification using components from quality suppliers. The following information is provided to assist you with any repairs required within the warranty period. • All warranty repairs on Silvan products are carried out by Silvan dealers. If any warranty repairs are required on Silvan products, it is recommended that the product be returned to the place of purchase.
Safety Information Before operating the sprayer read the following safety instructions. Failure to comply with these warnings may result in serious injury or death. Whilst your pump has been designed and manufactured to incorporate all necessary safety features it is essential that any person who operates or works on the machine is aware of the safety precautions that should be exercised.
Specification PUMP TYPE No OF PRESSURE POWER WEIGHT DIAPHRAGM DELIVERY p.s.i (HP) l/min BP 20/15 18.7 0.83 BP 60/20 BP 75/15 2.68 BP 125/20 BP 151/20 BP 171/20 9.38 BP 265/20 14.3 BP 305/20 15.8 MP 20 MP 30 MP 40, MP40AP...
Page 7
Identification BP 20 / 15 BP 75 / 15 BP 60 / 20 BP 125 / 20 BP 265 / 20, BP 305 / 20 BP 151 / 20, BP 171 / 20 Page 6...
Installation When a dealer or an owner installs a pump, 6. The suction hose between the tank and the the following guidelines must be met: filter should have a shutoff valve installed, to allow the strainer to be cleaned without 1.
Operation This pump been designed 2. Adjust the air pressure in the pressure constructed solely to pump agricultural liquid accumulator if fitted (fig 3) in accordance with chemicals, normally used for pest, weed and the operating pressure used to spray. Adjust fungus control.
Maintenance Disconnect the tractor PTO or power the crankcase of water and pour in oil supply before performing any operation diesel oil to stop rust from forming on the on the pump. internal components. Suction The level and condition of oil should be The suction system must be inspected to frequently checked (eg.
Lubrication and Maintenance Maintenance Program Chart MAINTENANCE INTERVALS OPERATION Every Every Every End of 8 hours Season hours hours CHECK LEVEL OIL CHECK PRESSURE ACCUMULATOR CHECK SUCTION FITTINGS CHECK AND CLEAN SUCTION FILTER CHECK PUMP MOUNTING CHECK DIAPHRAGM CHANGE OIL O(1) O(2) CHECK INLET/OUTLET VALVES...
Need help?
Do you have a question about the BP 20/15 and is the answer not in the manual?
Questions and answers