1. Manuals
  2. Brands
  3. COX Manuals
  4. VoIP
  5. CISCO UC320
  6. Configuration manual

COX CISCO UC320 Configuration Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
www.CoxBusiness.com
SIP Trunking Configuration Guide
for
Cisco UC320
Firmware Release 2.1.1
© 2011, Cox Communications, Inc. All rights reserved.
This documentation is the confidential and proprietary intellectual property of Cox
Communications, Inc. Any unauthorized use, reproduction, preparation of derivative works,
performance, or display of this document, or software represented by this document is strictly
prohibited.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CISCO UC320 and is the answer not in the manual?

Questions and answers

Summary of Contents for COX CISCO UC320

  • Page 1 Firmware Release 2.1.1 © 2011, Cox Communications, Inc. All rights reserved. This documentation is the confidential and proprietary intellectual property of Cox Communications, Inc. Any unauthorized use, reproduction, preparation of derivative works, performance, or display of this document, or software represented by this document is strictly...

  • Page 2: Table Of Contents

    6.2.1 Adding and Removing Platform Modification Files..............13 Table of Figures Figure 1 - Cox Fiber Network ........................3 Figure 2 - SIP Trunk Lab Reference Network....................4 Figure 5-1 UC320 Routes Voice Only Network Topology ................7 Figure 5-2 Network WAN Internet Configuration ..................8 Figure 5-3 Voice VLAN ..........................

  • Page 3: Audience

    Support for geo-redundant PBX deployments and automatic reroute of SIP trunks to the backup customer data center. All calls are routed over Cox’s national fiber network with guaranteed Quality of Service (QoS); calls never traverse the Internet. Figure 1 - Cox Fiber Network Property of Cox Communications, Inc.

  • Page 4: Sip Trunking Network Components

     Acme Packet Net-Net 9200 Session Border Controllers (SBC). The Cisco UC320 configuration detailed in this document is based on a lab environment with a simple dial-plan used to ensure proper interoperability between COX SIP network and Cisco UC320 telephony solution.

  • Page 5: Hardware Components

    Cox Network requires SIP REGISTER support to allow the IP-PBX to originate calls from the IP-PBX and to send calls to the PBX from the PSTN. The Cisco UC320 supports SIP Register with authentication. Cox implementation team provides the Pilot number and the authentication key, which should be provisioned in the Cisco UC320.

  • Page 6: Ip Address Worksheet

    EdgeMarc E-SBC  LAN IP Address 192.168.1.1  LAN Subnet Mask 255.255.255.0 Cisco UC320 IP PBX  System WAN IP Address 192.168.1.2 The Internet Connection will typically be on the same subnet as the LAN IP Address of the E- SBC.

  • Page 7: Cisco Network Configuration

    Network Topology Cox Business currently supports the “UC320W Routes Voice Only” Network Topology configuration, meaning the Cox E-SBC is connected to the UC320W WAN Ethernet port and routes only voice, i.e. SIP Trunks. Please refer to the network diagram in Figure 2 and the IP Address worksheet in Table 1 to cross reference the example lab network IP addresses with your actual network values in the following screens.

  • Page 8: Wan Network

    WAN Network In the “UC320W Routes Voice Only” network configuration, the UC320W WAN port is assigned in the same subnet as the Cox E-SBC LAN IP address. The UC320W default gateway is set to the Cox E-SBC LAN IP address.

  • Page 9: Voice Vlan

    192.168.10.X range.  Connect the PC with an Ethernet cable to a UC320 LAN port.  Open a web browser to the UC320 WAN IP address, e.g. 192.168.10.2. Property of Cox Communications, Inc. Version 1.0 Page 9 of 13...

  • Page 10: Sip Trunk Configuration

    2. Description: Cox Communications SIP Trunking 3. Proxy: 192.168.1.1 (Enter the LAN IP Address of the Cox E-SBC. Note your actual LAN IP may be different! Please refer to the network diagram in Figure 2 and IP Address worksheet in Table 1.) 4.

  • Page 11: Figure 6-2 Sip Trunking Configuration Parameters: 2 Of 2

    This is also known as the Main Directory Number for the customer account. 12. Password: <As provided by Cox Communications> The SIP Authentication Password will be provided by your Cox Account Representation and must be kept confidential. Cox will never ask for your password.

  • Page 12: Cisco Uc320 Apply Changes

    6.2 Cisco UC320 Apply Changes The PBX settings can be reviewed on the Site Summary screen: Figure 6-3 Site Summary Network setting tab detail: Figure 6-4 Network Summary Detail Property of Cox Communications, Inc. Version 1.0 Page 12 of 13...

  • Page 13: Adding And Removing Platform Modification Files

    The COX_UNDO.pmf is also available to undo the PMF file changes. Do the following to apply the Cox PMF files to the UC320W: 1. Download the .pmf files for Cox Communications are from the Cisco UC320 Customized Clearinghouse at http://www.ciscosbs2.com/movies/ucc/latest/ to your personal computer.

Table of Contents