CONTENTS IMPORTANT SAFETY & NOTICE ....................SYSTEM BASICS Location of Controls - Main Unit ......... Location of Controls - Remote ..........Power Supply ................. Connection of Speaker Boxes ..........DIGITAL CLOCK Digital Clock Function ............How to Set Correct Time ............Automatic Power on/off Timer Function .......
Page 4
IMPORTANT SAFETY & NOTICE The lightning fl ash and arrowhead within the triangle is a warning sign alerting you of “dangerous voltage” inside the product. WARNING: CAUTION To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable RISK OF ELECTRIC SHOCK parts inside.
DIGITAL CLOCK DIGITAL CLOCK FUNCTION - The set has a built-in digital clock, which is displayed when the unit is in “standby mode” or when you press & hold PROGRAM key for 10 seconds during CD or radio operation. - To set the correct time, follow this procedure: HOW TO SET CORRECT TIME: Switch unit to “stand-by”...
DIGITAL CLOCK AUTOMATIC POWER ON/OFF TIMER FUNCTION - This set has a timer function to enable you to program the unit to automatically switch “on” or “off” at preset times. This is useful as a morning alarm clock : HOW TO SET TIMER 1.
GENERAL FUNCTION ELECTRONIC VOLUME CONTROL - This unit uses an electronic volume control (push button type). - To increase or decrease the loudness of unit, press the volume up (vol +) or volume down (vol -) keys respectively. - Release the key when volume level is at the desired loudness. - Sometimes, especially during listening to the radio, you may notice a “CLICK-CLICK- CLICK”...
RADIO OPERATION OF RADIO - Press the “on/off” key once to switch on the unit. - Press the FUNCTION key to select radio mode. - Press the BAND key to select the desired radio band. - For MW (AM) stations, rotate or reposition the set to improve radio reception. - To improve FM-radio reception, fully extend the FM-antenna wire and adjust it’s position.
CD AUDIO INSERTION AND REMOVAL OF DISCS Press the “function” key repeatedly until the display shows “CD”. Press the open/ close key to open the CD-door. Carefully place a compact disc (CD or MP3 disc) onto the center spindle with the label side (printed side of disc) facing outwards (towards you). Press the “open/ close”...
CD AUDIO PROGRAMMING THE CD-PLAYER - The CD player can be programmed to play any sequence of upto 20 tracks for CD audio disc, 99 tracks for CD-MP3, as desired. - Always press the STOP key before starting the programming. - Press the PROGRAM key once, the display will show the “memory”...
CD-MP3 WHAT IS MP3 ? - MP3 (MPEG 2, layer 3) is a digital fi le format for audio (music). - You can download MP3 songs from many websites on the internet (please observe the copyright regulations of your country). - MP3 songs are much smaller is memory size compared with normal CD-audio format songs.
USB & SD CARD USB-DRIVE & SD-CARD MP3 PLAYBACK - This unit is equipped with a USB socket which can accept and play MP3 fi les stored on standard USB fl ash drives (also known as “pen drives”) which are for memory storage. (Compatible with USB version 1.1 &...
iPod OPERATION PREPARATION OF iPod DOCK To connect an iPod with a dock connector to this unit, fi rst insert the dock adaptor that fi ts your iPod, and then connect your iPod. Your Hi-Fi includes dock adaptors that work with several models of iPod with dock connectors.
iPod OPERATION & SUBWOOFER OPERATION WITH THE iPod - Turn on both the unit and the iPod docking platform. - Connect the iPod to the unit as described. - Press the “function” key until the iPod docking platform shows a blue light. - Press the Play key on the remote control, then the iPod docking platform to begin playback.
SPECIFICATIONS & SET UP SPECIFICATIONS AC-Power Supply : ......AC240V ~ , 50Hz AC-Power Consumption : ......32W Speaker : ......4” x 2 Woofer + 1½” x 2 Tweeter Speaker Capacity Power : ......36W (18W x 2) Amplifi er Maximum Power : ......5W SYSTEM SET UP PROCEDURE A.