Precautions - Vardsafe VS703K Product Manual & Installation Instruction

Precautions

Operating Precautions
1. The device may be powered by a 12 or 24 volt automotive battery or vehicle electrical
system.
2. Make sure all cables are connected properly observe polarity. Improper cable connections
may damage the monitor. Remove the power cable connections when you do not intend
to use the unit.
3.The Rear View Camera System should only be used when the vehicle is in reverse. Do not
watch movies or operate the monitor while driving,It may cause an accident.
4.Firmly fix the monitor stand to secure location.
5.Do not install the monitor where it may obstruct drivers view or obstruct an air bag device.
6.While installing the Rear View Camera System be careful with the wire positioning in order
to avoid wire damage.
Storage and keeping
1. Do not expose the monitor to excessive heat or cold. The storage temperature of this
device is -30 ~+80℃, and the operating temperature is -20 ~+65℃. The Humidity is
Rh90%.
2. Never use this monitor near a bathtub, wash basin, kitchen, damp basement, swimming
pool or similar place.
3. Never use this monitor in environments with excessive moisture, dust or smoke.
4. Avoid dropping or striking this monitor .
5. Avoid using this monitor in enclosed spaces, areas with excessive vibration or subject to
severe impacts.
6. Never puncture, scratch or use abrasive cleaning materials on this monitor.
7. Do not place cables where they may be pinched or stepped on.
8. Leave at least a 2"space between the monitor and walls, cabinets or other objects to allow
adequate air circulation around the unit.
9. The monitor is not designed to be waterproof.
Vardsafe Technology Co.,Ltd
www.vardsafe.com
info@vardsafe.com
3