1. Manuals
  2. Brands
  3. TIL Manuals
  4. Receiver
  5. TiL-92-SC
  6. Installation and operating instructions manual

TIL -92-SC Installation And Operating Instructions Manual

Vhf/am single channel receiver model til-92-sc
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
VHF/AM SINGLE CHANNEL
RECEIVER Model TiL-92-SC
92-SC RECEIVER P/N 931040-1
(ITEM NO. TSR-4100)
Installation and
Operating Instructions
TiL Document No. 93RE125
Rev. F
JULY 2012
Technisonic Industries Limited
240 Traders Boulevard, Mississauga, Ontario L4Z 1W7
Tel: (905) 890-2113 Fax: (905) 890-5338
www.til.ca
Copyright by Technisonic Industries Limited. All rights reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TiL-92-SC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for TIL TiL-92-SC

  • Page 1 VHF/AM SINGLE CHANNEL RECEIVER Model TiL-92-SC 92-SC RECEIVER P/N 931040-1 (ITEM NO. TSR-4100) Installation and Operating Instructions TiL Document No. 93RE125 Rev. F JULY 2012 Technisonic Industries Limited 240 Traders Boulevard, Mississauga, Ontario L4Z 1W7 Tel: (905) 890-2113 Fax: (905) 890-5338 www.til.ca...
  • Page 3 REVISION HISTORY [ 93RE125 ] SECTION Edited DESCRIPTION DATE - PAGE - Original Document Global New Document Template (new file format) Title page changed, Headers/Footers added Added Revision page, Added Warranty page Added note to §2.3 Channel Freq. Selection referring to units built after Jan 2012 with a USB FEB 2012 port and added Appendix A (TDP-90 for USB AM units) with Installation and Operating Instructions.
  • Page 4 iiii...
  • Page 5 WARNING Do not make physical contact with antenna when transmitter is on. CAUTION ! STATIC SENSITIVE ! This unit contains static sensitive devices. Wear a grounded wrist strap and/or conductive gloves when handling printed circuit boards. FCC COMPLIANCE INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 7: Table Of Contents

    Receiver Operation (Local Mode) ..................3-4 3.4.2 Switching OFF ........................3-5 3.4.3 External DC Operation ...................... 3-5 WARRANTY ............................Appendix A..TDP-90 Programming Software User’s Guide (for USB) ..........A-1 TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F...
  • Page 8 TABLE TITLE PAGE 92-SC Leading Particulars ....................... 1-4 Frequency Selection MHz ......................2-7 Frequency Selection kHz ......................2-8 Remote Connector Functions ....................2-9 Operator's Switches, Controls and Indicators ................3-3 TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F...

  • Page 9: General Description

    TiL-92-SC, Part No. 931040-1, manufactured by Technisonic Industries Limited. This unit is also referred to by Item No. TSR-4100. The Model TiL-92-SC, Receiver is a single channel, fixed frequency receiver operating over the frequency range of 117.975 MHz to 138.000 MHz. This unit is intended for base station operation in an air traffic environment.

  • Page 10: Receiver Module

    Line Interface Board P/N 923060-1 NOTE This board is supplied modified for the 92-SC, Receiver without transmitter keying functions. Provides remote receiver audio monitoring over 2 wire 600 ohm audio lines. TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F...

  • Page 11: Crystal Filter (Option 1)

    21.7 to 30.0 Vdc. TECHNICAL SUMMARY A summary of electrical, operational, mechanical and physical characteristics of the Single Channel Receiver are provided in Table 1.1. TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F...
  • Page 12 Width ………………………………………….…………………………………………... 216 mm (8.5 in) MAX Height …………………………………….……………………………………………….. 70 mm (2.75 in) MAX Depth ………………………………………………………………………………..…. 260 mm (10.25 in) MAX Weight ………………………………………………………………………….………. 1.8 Kg (3 lb 15 oz) MAX TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F...
  • Page 13 Audio Frequency Response 300 Hz-2500 Hz …………………………………………….. +1, -3 dB Audio Acquisition Time ……………………………………………………….…. Less than 50 msecs Audio Squelch Characteristics: Squelch Type ……………………………………………………………. Noise and Carrier Operated Carrier Operated Squelch …………………………………………………. Adjustable 2 to 15 µvolts TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F...
  • Page 14 TECHNISONIC INDUSTRIES LIMITED www.til.ca This page intentionally blank. TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F...

  • Page 15: Preparation For Use And Storage

    Move the receiver module slightly back from the front panel and disconnect the flat cable connecting the front panel assembly to the transceiver module, audio interface board A3. The connector is located on the A3 board. Lift receiver module clear of chassis. TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F...

  • Page 16: Single Channel Receiver - Internal View

    TECHNISONIC INDUSTRIES LIMITED www.til.ca Figure 2.1 Single Channel Receiver - Internal View TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F...

  • Page 17: Remove/Replace Audio Board

    Mother Board using the four mounting holes and standoffs as a guide. Secure control board to the Mother Board standoffs with four screws and washers. Replace dust cover as described in paragraph 2.2.1. TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F...

  • Page 18: Single Channel Memory Set Board - Module A5A1

    TECHNISONIC INDUSTRIES LIMITED www.til.ca Figure 2.2 Single Channel Memory Set Board Module A5A1 TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F...

  • Page 19: Remove/Replace Crystal Filter Board

    Early radios have their frequencies programmed by a diode matrix as described in Section 2.3.3. For radio units shipped after July 2012 and equipped with a USB port, please refer to Appendix A (TiL TDP-90 Programming Software User’s Guide for USB Programmable AM Series Transceivers) - Document 11RE439.

  • Page 20: Offset Frequency Set

    If J15 is installed in the Tx position, the receive frequency will be offset high. Trim capacitors C16 and C37, accessible from the bottom of the unit (see Figure 2.6), are used to accurately adjust the receive frequency. TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F...
  • Page 21 JUMPER LOCATION FREQUENCY (MHz) 20 MHz 10 MHz 8 MHz 4 MHz 2 MHz 1 MHz LEGEND: 0 = JUMPER BETWEEN CENTRE AND 0 1 = JUMPER BETWEEN CENTRE AND 1 TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F...
  • Page 22 DIODE LOCATION FREQUENCY (kHz) 800 kHz 400 kHz 200 kHz 100 kHz 50 kHz 25 kHz LEGEND: 0 = JUMPER BETWEEN CENTRE AND 0 1 = JUMPER BETWEEN CENTRE AND 1 TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F...

  • Page 23: Remote Operation Setup

    R12 and R32 along with Jumpers J1, J2 and J3 (all of which control TX functions) are located on the 923060-1 board but will not have any function when used in the TSR-4100 receiver. TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F...
  • Page 24 TECHNISONIC INDUSTRIES LIMITED www.til.ca Figure 2.3 Remote Audio Board P/N 923060-1 TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F 2-10...

  • Page 25: Optional Loudspeaker, Headphone Installation

    Remote Audio Monitoring Unit. STORAGE To store for an extended period, store unit in a dry place, in the original shipping container. TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F 2-11...
  • Page 26 TECHNISONIC INDUSTRIES LIMITED www.til.ca Figure 2.4 Receiver Settings and Adjustments TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F 2-12...

  • Page 27: Introduction

    A view of the front and rear panel is given in Figure 3.1. A functional description of each of the operator's switches, controls and indicators are given in Table 3.1, Operator's Switches, Controls and Indicators. TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F...
  • Page 28 TECHNISONIC INDUSTRIES LIMITED www.til.ca Figure 3.1Single Channel Receiver Controls and Indicators TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F...
  • Page 29 Refer to Table 2.3 for connector details. *25 PIN REMOTE 25 Pin "D" type connector provides connections required for remote CONNECTOR operation. Refer to Table 2.3 for connector details. TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F...

  • Page 30: Receiver Operation (Local Mode)

    If the dual conversion receiver’s squelch knob is set to the 12 o’clock position, signals with a level greater than 0.5uV will open the squelch. At most airports this will not be an adequate level of squelch. TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F...

  • Page 31: Switching Off

    Ensure that the DC source voltage is within the range of 11.5 Vdc to 15 Vdc, unless optional A6 Module is ordered to allow operation with an input supply from 21.7 Vdc to 30 Vdc. TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F...
  • Page 32 TECHNISONIC INDUSTRIES LIMITED www.til.ca This page left intentionally blank. TSR-4100 92-SC Installation & Operating Instructions TiL 93RE125 Rev F...

  • Page 33: Warranty

    Technisonic. This Warranty shall not be transferable or assignable to any other persons, firms or corporations. For warranty registration please complete the on-line Warranty Registration Form found at www.til.ca.

  • Page 35: Programming Software

    Canadian Government, or to the United States Government, this document may not in whole or in part, be duplicated or disclosed or used for manufacture of the part disclosed herein, without the prior permission of Technisonic Industries Ltd. TiL TDP-90 Programming Software User’s Guide...
  • Page 36 This page left intentionally blank.
  • Page 37 NOTE: The images in this document are examples only and may not reflect your particular data settings, or current TDP software version. The TDP-90 programming software can be found under the “Programming Software” link at http://www.til.ca/ SOFTWARE INSTALLATION Note: The USB driver must be installed before attempting to use the TDP-90 software.
  • Page 38 APPENDIX A 11RE439 Rev A GETTING STARTED To start the TDP 90 program, double click the TDP90 icon on the desktop. The following Graphical User Interface will appear. The current version number is shown in square brackets on the title bar. MAIN GRAPHICAL USER INTERFACE Figure 1...
  • Page 39 APPENDIX A 11RE439 Rev A ICONS AND PULL DOWN MENUS The icons and pull-down menus provide the set-up and operating functions. The Channels pull-down tab provides selection for single or six channel transceivers (use the 6 channel window for 4 channel transceivers). The number of channels in the Frequency editing window changes accordingly.
  • Page 40 APPENDIX A 11RE439 Rev A FILE MENU Figure 3 Open will allow you to select and load an existing file that was previously saved on disk. The yellow folder icon provides the same function in a single mouse click. Save will allow you to save the current data into a file with a name of your choice. The filename may be any length up to 64 characters.
  • Page 41 APPENDIX A 11RE439 Rev A DATA MENU Figure 4 Download (to Radio) instructs the TDP 90 software to transfer the frequency data in the list to the memory channels in the connected AM transceiver. The Dn icon provides the same function in a single mouse click.
  • Page 42 APPENDIX A 11RE439 Rev A HELP MENU Figure 5 TDP-90 Help Contents opens the Windows Help dialog for the TDP-90 software. Here, you will find hardware connection and operating information as well as troubleshooting tips and answers to some Frequently Asked Questions. About selection displays Technisonic company and contact information as well as the revision number of the TDP software in the “Terminal window”...
  • Page 43 APPENDIX A 11RE439 Rev A CHANNEL SELECTION PULLDOWN 1 CHANNEL TRANSCEIVER Figure 6 6 CHANNEL TRANSCEIVER Figure 7 The x Channel(s) pull-down tab allows you to select for single or six channel AM transceiver use. The frequency editing window changes accordingly. The “W” indicates that the channels are 25kHz (Wide) channel spacing and as such, only channels in 25kHz increments are accepted.
  • Page 44 APPENDIX A 11RE439 Rev A SAMPLE UPLOAD AND DOWNLOAD Connect the transceiver to the computer USB port using a standard USB-A male to USB- B male cable. The USB port is located on the rear panel of mobile and base station transceivers and on the front panel of rack mount transceivers.

Table of Contents